{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Burr, fine Tooth configuration P – plastic, Carbide, Type: AS0625
Article no.: 672527
Catalog no.: 547330
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | suitable only under restricted conditions | |
| Series | Zahnung P | |
| Wet maximum | suitable only under restricted conditions | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder version | metric | |
| Holder size, metric | 0060 mm | |
| Dry machining | suitable | |
| Shank diameter | 6 mm | |
| Shank length | 39 mm | |
| Oil | unsuitable | |
| Air | suitable | |
| Tool material | Carbide | |
| Machining group | N (non-ferrous metals) | |
| Coating | uncoated | |
| Cutter diameter | 6 mm | |
| Cutting edge length | 25 mm | |
| Head length | 25 mm | |
| Burr, type of end face | with end cut | |
| Twist direction | right-hand | |
| Burr shape | cylindrical burr | |
| Shape identifier, manufacturer-specific | AS0625 | |
| Spacing of the cutters | the same | |
| Type of cut | single toothing | |
| Toothing grit designation | fine | |
| Interface | joint 1 | |
| Usable length | 25 mm | |
| Overall length | 64 mm | |
| Functional length | 25 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 8033 | |
| Machining method | form milling (die milling) | |
| Colour ring | without | |
| Machining strategy | HPC | |
| Type of product | burr |
Identification & Classification
| Article number | 672527 | |
| Catalog number | 547330 | |
| EAN / GTIN | 4045197973177 | |
| Manufacturer number | 547330 AS0625 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
Description
Version:
The special tooth geometry generates reduced cutting forces and avoids frayed fibres. Cylindrical shape (ZYA).
Cutter geometry ideal for hard CRP/GRP with fibre content > 40 %.
Cutter geometry ideal for hard CRP/GRP with fibre content > 40 %.
Application:
Side milling, contour milling and deburring (especially of fibre-reinforced plastics).