{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Short drill chuck Form A, HSK-A 63, Clamping range: 0,5-13mm
Article no.: 673514
Catalog no.: 307725
Article code:
Product details
Technical Data
| Through-coolant | yes, with max. 50 bar | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Kurzbohrfutter Form A | |
| Interface position | on the machine; on the workpiece | |
| Holder type | hollow shank taper HSK; plain shank | |
| Interface coding | HSK06300195; ZYL01300115 | |
| Holder shape | flat surface contact, standard taper form A; plain shank | |
| Holder version | dimensionless nominal size with cooling; metric | |
| Holder size, metric | 13 mm | |
| Holder size, no dimensions | 63 | |
| Type of mounting | spigot; hole, adjustable | |
| Shank diameter DS | 13 mm | |
| Min. clamping diameter D1 | 0.5 mm | |
| Max. clamping diameter D1 | 13 mm | |
| Gauge length A | 101 mm | |
| External diameter, on the tool side D | 43 mm | |
| With cooling channel bore | yes | |
| Max. coolant pressure | 50 bar | |
| Interface | joint 1; joint 2 | |
| Type of product | SK keyless drill chuck | |
| Standard | DIN 69882-7; DIN 69893-1; ISO 12164-1 | |
| Shape | A | |
| With hole for RFID data carrier | yes | |
| Through-coolant available | yes | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 673514 | |
| Catalog number | 307725 | |
| EAN / GTIN | 4045197931870 | |
| Manufacturer number | 307725 0,5-13 | |
| Article class | 31B | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- For clockwise and anticlockwise rotation.
- With RFID/Balluffchip bore.
With through coolant feed up to max. 50 bar.
Concentricity ≤ 20 µm.
- Slim design.
- Specific coolant transfer to tools with IC.
- Optimum holding torques at the tool.
Supplied with:
Clamping wrench with T-handle.
Optional extras:
Warning:
Intended use
Reasonably foreseeable misuse
- Use the device to clamp cylindrical tool shanks in machine spindles.
- The device is intended exclusively for clockwise and anti-clockwise rotation.
- Clamping range: 0.3 mm to 16 mm.
- Maximum speed: 25,000 rpm.
Reasonably foreseeable misuse
- Clamping of conical shanks.
- Clamping of square or similar shanks.
- Clamping of damaged shanks.
- Exceeding the maximum tightening torque (15 Nm).
- Exceeding the maximum speed (25,000 rpm).
- Use of extensions or tightening aids.