{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Vario Basic workbench, with electric height adjustment, Bamboo worktop, Worktop length: 1000/DEmm
Article no.: 677983
Catalog no.: 923251
Article code:
Product details
Technical Data
| RAL colour | RAL 7035 | |
| Part described | Frame | |
| Material thickness | 1 mm | |
| Coating | powder-coated | |
| Steel hollow section construction | yes | |
| Plug type, input | F | |
| Suitable for countries | Germany | |
| Power consumption | 340 W | |
| Nominal voltage | 250 V | |
| AC supply voltage | 250 V | |
| Mains frequency | 50 Hz | |
| Colour, grey | Light grey | |
| Part described | Fußteile; Korpus; Fußteile; Korpus | |
| Series | Vario Basic | |
| Material | sheet metal | |
| Power supply | mains-powered | |
| Colour | grey | |
| Colour selection | GARANT colours | |
| Min. overall height | 850 mm | |
| Max. overall height | 1,050 mm | |
| Stepless height adjustment | yes | |
| Type of height adjustment | electrical | |
| Lifting speed | 9 mm/s | |
| Display, electrical | no | |
| Memory function, electrical | no | |
| Support width | 50 mm | |
| Width of plate | 1,000 mm | |
| Depth of plate | 750 mm | |
| Thickness of plate | 50 mm | |
| Material of plate | Bamboo | |
| Shape of plate | Rectangular | |
| Edge band | yes | |
| Edge strip version | on 4 sides | |
| Type of wheel/castor | Swivel castor; Swivel castor | |
| Parking brake, swivel castor | yes; yes | |
| Number of rolls, swivel castor | 4 pcs.; 4 pcs. | |
| Number of wheels/castors | 4 pcs.; 4 pcs. | |
| Type of product | workbench | |
| Height adjustment | yes | |
| Overall width | 1,000 mm | |
| Overall depth | 750 mm | |
| Max. load capacity | 400 kg | |
| Load capacity, distributed | 400 kg | |
| Can be installed in a row | yes | |
| Weight | 60 kg | |
| Body | no | |
| Support leg | yes | |
| With vice | no | |
| Worktop / cover plate provided | yes | |
| Mobile | no; yes |
Identification & Classification
| Article number | 677983 | |
| Catalog number | 923251 | |
| EAN / GTIN | 4062406085902 | |
| Manufacturer number | 923251 1000/DE | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Workbench in sturdy steel construction. Support legs 50 mm wide with cross bracing. With 2 pair of stabilising plates for stiffening. Stepless electric drive for height adjustment. Height adjustment by pushbutton. Connecting cable with German Schuko plug. Rated capacity 250 V / 50 Hz at maximum 340 W.
Function:
IP20: Protected against penetration by foreign bodies with ⌀ < 12 mm, however touching should be avoided, and offers no protection against water.
Supplied with:
2 × support legs with electric height adjustment, 2 × pairs of stabilising plates, worktop.
Optional extras:
Additional accessories such as casing, side panels, etc. can be found under GridLine individual components in Group 92.
Colour:
Body and supports light grey RAL 7035 powder-coated.
Note:
Supplied as components, not assembled. The position of the manual pushbutton can be freely selected. When benches are installed in a row, it is essential that additional side plates No. 927220 are fitted.
Warning:
Intended use
Reasonably foreseeable misuse
- Use the workbench only when in good technical condition, with awareness of the safety requirements and potential hazards.
- If any faults occur which may affect safety, have them rectified without delay.
- Repairs by Hoffmann Group Customer Service.
- Workbench with electric height adjustment for ergonomic performance of assembly and inspection work.
- For work in indoor industrial environments.
- For use on dry solid floors.
- Drawers for storage of tools.
- Storage shelf for storage of workpieces and tools.
- Use exclusively approved Hoffmann Group accessories for modification or rebuilding.
Reasonably foreseeable misuse
- Do not place or position on the workbench.
- Not for use in areas where the floor slopes upwards or downwards.
- Not for use in areas where the floor is loose or unpaved.
- Do not overload the workbench, worktop, drawers or storage shelves.
- Do not make any unauthorised changes or modifications to the manual pushbutton, spindle lift system or control module.
- Do not use in explosion hazard areas.