{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
ULTRACUT concrete screws FBS II 6x35 M10/21
Article no.: 682101
Catalog no.: 3354
Article code:
Product details
Technical Data
| SW | 13 mm | |
| Application conditions | Inside | |
| Min. bolt penetration | 35 mm | |
| Material | Galvanised steel | |
| h2 | 40 mm | |
| Thread length | 16 mm | |
| M | M10 | |
| Professional / DIY | DIY | |
| Environment | Inside | |
| Screw length | 35 mm | |
| Surface protection | Galvanic/electrolytic zinc plated | |
| Packing | Folding box | |
| l | 35 mm | |
| min. drill hole depth for pre-installation | 45 mm | |
| Test marks / approvals | Fire classification |
Packaging units
| 1 Pack | 100 Pieces | |
| 1 Pallet | 20800 Pieces |
Identification & Classification
| Article number | 682101 | |
| Catalog number | 3354 | |
| EAN / GTIN | 4048962329568 | |
| Manufacturer number | 546398 | |
| Article class | RMN |
Description
Advantage:
- The ETA assessment option 1 includes the use in cracked and non-cracked concrete for highest safety requirements (for screw length of 55 mm).
- The first 6 mm diameter concrete screw with an ETA assessment for the C1 seismic performance category for additional safety standards.
- The UltraCut FBS II 6 is approved for multiple use of non-load bearing systems and thereby ideal for the installation of pipe routes, cable trays and prestressed hollow concrete ceilings.
- Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
- Different head designs offer a maximum of flexibility and a perfect adaptation to the application.
- The hanger bolt enables the easy and suitable application of pipe clamps and connecting elements.
- The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
- The concrete screw UltraCut FBS II 6 offers the possibility for use in masonry (solid building material).
- The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates.
- The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups.
Application Area:
- Pipeline routes
- Suspension for individual pipes
- Suspended mounting rails
- Prestressed concrete hollow core ceilings
- Cable trays
- Ventilation ducts
- Perforated tapes
Approved for:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Prestressed hollow concrete ceilings C30/37 to C50/60 for the multiple use of non-load bearing systems
- Bricks of clay (EN771-1)
- Solid sand-lime brick (EN771-2)
- Perforated sand-lime brick (EN771-2)
- Concrete C12/15
- Masonry with a dense structure
- Solid building materials
Application Notes:
- We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive.
- Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
- The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control).