{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Cut-resistant arm protection Cut C, Length: 45cm
Article no.: 689960
Catalog no.: 094596
Article code:
Product details
Technical Data
| Colour, grey | Silver grey | |
| Manufacturer’s designation | HOLEX Cut C | |
| Contents in pieces | 1 pcs. | |
| Cut protection class, EN 388 | C | |
| Version, EN 388 | EN388:2016 | |
| Resistance to abrasion | 3 | |
| Resistance to cuts (Coupe test) | X | |
| Tear propagation resistance | 4 | |
| Resistance to penetration | X | |
| Resistance to cuts (TDM) | C | |
| Impact protection | not defined | |
| EN 388 code | 3X4XC | |
| Colour | grey | |
| Type of product | arm protection | |
| Area of application | cut protection | |
| Glove size | 9 | |
| Closure | elasticated band | |
| Version | five-fingered | |
| Reuse | reusable | |
| Unit | pieces | |
| Standard | EN 388; EN ISO 21420 | |
| Backing material | HPPE fibre | |
| Coating | no coating | |
| Lined | no | |
| Characteristics | DMF free; silicone-free; with thumb hole | |
| Protection category | II | |
| Overall length | 450 mm |
Identification & Classification
| Article number | 689960 | |
| Catalog number | 094596 | |
| EAN / GTIN | 4062406133009 | |
| Manufacturer number | 094596 45 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
HOLEX Cut C. Arm protection with cut protection level C for activities with high cut hazards. With thumb hole.
Standard:
EN 388; EN ISO 21420
Supplied with:
1 pc. arm protection.
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Protect arms against mechanical risks, abrasions and cutting hazards.
- Can be combined with cut-resistant glove.
- Optimum protection is obtained only when the area to be protected is completely covered. The arm protector must not be allowed to slip.
Reasonably foreseeable misuse
- Offers no protection against chemical, microbiological, thermal or electrical hazards.
- Do not wear when close to rotating machine parts.
- Do not continue using following contact with sharp-edged items.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.