{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Torque wrench with dial gauge with fixed square, maximum torque: 1,5N·m
Article no.: 690423
Catalog no.: 655500
Article code:
Click to enlarge image
Click to enlarge image
Beschreibung der Legende siehe Beschreibungstext.
Product details
Technical Data
| Hebellänge inklusive Werkskalibrierstichmaß l3 | 170 mm | |
| Breite Abtriebsteil | 37 mm | |
| Höhe Abtriebsteil | 59 mm | |
| Knickfunktion | no | |
| Slipperfunktion | no | |
| Verstellbarkeit Auslösewert | nicht verstellbar | |
| Maßeinheit Drehmoment | Nm | |
| Drehmoment min., Nm | 0,2 | |
| Drehmoment max., Nm | 1,5 | |
| Einstellung des Auslösewertes | Schleppzeiger | |
| QuickRelease / Schnellwechselfunktion | no | |
| Oberfläche Werkzeug | verchromt | |
| Größe, fest | 1/4 Zoll | |
| Maßeinheit Skalenteilung | Nm | |
| Skalenteilung 1 Teilstrich | 0,02 Nm | |
| Drehmoment-Einheit | Nm | |
| Daten protokollierbar | no | |
| Auslösesignal | optisch | |
| Feedback | anzeigend | |
| Kalibrierbar | yes | |
| Inhalt | Einzelteil | |
| Produktart | Drehmomentschlüssel | |
| Anzugsrichtung | rechts-links | |
| Form des Anschlusses | fest | |
| Messtechnik | mechanisch | |
| Messfunktionen | Drehmoment | |
| Anzeige | analog | |
| Drehmomentbereich min. | 0,2 Nm | |
| Drehmomentbereich max. | 1,5 Nm | |
| Drehmomentgenauigkeit im Uhrzeigersinn | 3 % | |
| Drehmomentgenauigkeit gegen den Uhrzeigersinn | 3 % | |
| Prüfprotokoll des Herstellers | ja | |
| Norm | DIN EN ISO 6789 | |
| Länge gesamt L | 205 mm | |
| Gewicht gesamt | 330 g |
Identification & Classification
| Article number | 690423 | |
| Catalog number | 655500 | |
| EAN / GTIN | 4562135127084 | |
| Manufacturer number | DB1.5N4-S |
Description
Version:
One-armed; slim design with easily readable dial gauge. Body entirely of steel, chrome-plated with fixed square drive for plug-in heads.
Units of measure: Nm.
Units of measure: Nm.
Function:
Actual torque can be read on the gauge whilst working; the final value is held by the memory pointer to be read later.
Application:
For controlled single tightening of screws and for controlled measurements.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.