{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Steel Feed solid carbide drill, plain shank DIN 6535 HB, TiAlN, ⌀ DC h7 (mm or inch): 11/32
Article no.: 692047
Catalog no.: 122436
Article code:
Product details
Technical Data
| Through-coolant | yes, with 25 bar | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Series | Master Steel | |
| Wet maximum | suitable | |
| Manufacturer’s designation | GARANT Master Steel Feed VHM-Bohrer zylindrischer Schaft | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder shape | straight clamping flat with flat surface contact | |
| Holder version | metric | |
| Dry machining | suitable only under restricted conditions | |
| Type of mounting | spigot | |
| Holder tolerance class | h$06 | |
| Shank diameter | 10 mm | |
| Shank type | HB | |
| Air | suitable only under restricted conditions | |
| ESD protected area (EPA) | no | |
| Cutter diameter, min. | 8.73 mm | |
| Cutter diameter, max. | 8.73 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class ISO | h7 | |
| Flute length | 47 mm | |
| Number of teeth | 3 | |
| Twist direction | right-hand | |
| Helix angle, min. | 30 degrees | |
| Angle, 1st step | 145 degrees | |
| Point geometry | Z | |
| Type of drilling tool | step drill | |
| Product designation (type) | N | |
| Tool material | solid carbide | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | VHM TiAlN | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Usable length | 33.905 mm | |
| Overall length | 89 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 6537 K | |
| Shape letter standard number | K | |
| Data carriers | without data carrier | |
| Machining method | drilling into solid material | |
| Colour ring | green | |
| Machining strategy | HPC | |
| Type of product | indexable drill | |
| Content | single part |
Identification & Classification
| Article number | 692047 | |
| Catalog number | 122436 | |
| EAN / GTIN | 4062406126933 | |
| Manufacturer number | 122436 11/32 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
160
P
140
P
130
P
110
P
90
H
60
M
60
M
50
S
40
K
130
K
80
Description
Version:
3-flute drill, specially developed for use at very high feed rates. Outstandingly suitable for machines with high installed power and stable machining conditions.
The sector-leading technology of the chisel point guarantees optimum self-centring behaviour and permits spot drilling on irregular surfaces. 3 guide chamfers guarantee a stable exit from the hole and an exact roundness of the hole.
- Special cutter geometry with stable cutting edges and large clearance at the centre enables very high feed rates.
- The patented tip is optimised for chip flow and generates low cutting pressure with good chip breakage.
- With a 145° point angle for low burrs on emerging from through holes.
The sector-leading technology of the chisel point guarantees optimum self-centring behaviour and permits spot drilling on irregular surfaces. 3 guide chamfers guarantee a stable exit from the hole and an exact roundness of the hole.
Note:
Flute length LC = L2 + 1.5 × DC.