{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Alu SlotMachine solid carbide roughing end mill HPC, DLC, ⌀ e8 DC: 6mm
Article no.: 701187
Catalog no.: 205265
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable only under restricted conditions | |
| Vorschub pro Zahn Besäumen fz | 0.1 mm | |
| Max. cutting depth, Full slot milling | 6 mm | |
| Max. cutting depth, Side milling | 18 mm | |
| Wet maximum | suitable | |
| Vorschub pro Zahn Nutenfräsen fz | 0.08 mm | |
| Eingriffsbreite max. ae | 1×D; 0,5×D | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00600105 | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 6 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 6 mm | |
| Length of shank LS | 38 mm | |
| Shank type | HA | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Series | Master Alu | |
| Manufacturer’s designation | GARANT Master Alu SlotMachine VHM-Schruppfräser | |
| Tool material | solid carbide | |
| Machining group | N (non-ferrous metals) | |
| Cutter diameter Dc | 6 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | e8 | |
| Recess diameter D1 | 5.5 mm | |
| Cutting edge length Lc | 18 mm | |
| Balancing quality | G 2,5 | |
| Plunge angle | 45 degrees | |
| Number of effective cutters (peripheral side) Z | 3 | |
| Number of effective cutters (end face) Z | 3 | |
| Twist direction | right-hand | |
| Twist angle | 35 degrees | |
| Number of corner versions | 1 | |
| Corner / edge | 1 | |
| Corner version | as radius | |
| Corner radius R | 0.2 mm | |
| Shape identifier, manufacturer-specific | WR | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 3 | |
| Helix angle characteristic | unequal spacing | |
| Cutting media, manufacturer’s designation | VHM | |
| Vorschub pro Zahn in | alu short-chipping | |
| Coating | DLC | |
| Interface | joint 1 | |
| Gauge length A | 24 mm | |
| Overall length L | 62 mm | |
| Functional length | 24 mm | |
| Max. speed | 35’000 min-1 | |
| Weight | 22 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | countersinking (plunge milling) (FSE); shoulder milling (FEC); slot drilling (keyway cutting) (FNB); slot milling (FNU) | |
| Colour ring | yellow | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 1.5 | |
| Cutting depth min. | 0.35 mm | |
| Cutting depth in use | Full slot milling; Side milling |
Identification & Classification
| Article number | 701187 | |
| Catalog number | 205265 | |
| EAN / GTIN | 4062406122539 | |
| Manufacturer number | 205265 6 | |
| Article class | 11X | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
450
N
400
N
380
N
120
N
100
N
160
N
200
Description
Version:
For roughing. Special profile for machining non-ferrous metals.
Advantage:
Optimised flute form, eccentric relief ground, generous chip spaces.
Up to 2 × D into solid material at very high feed rates and smooth cutting action.
Ramping capability up to 45°.
Very high feed rates when plunging vertically, thanks to special plunging geometry.
Up to 2 × D into solid material at very high feed rates and smooth cutting action.
Ramping capability up to 45°.
Very high feed rates when plunging vertically, thanks to special plunging geometry.
Note:
For HB shanks: use order no. 205266.