{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Steel SlotMachine solid carbide roughing end mill HPC, TiAlN, ⌀ d11 DC: 6mm
Article no.: 701211
Catalog no.: 205556
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable only under restricted conditions | |
| Vorschub pro Zahn Besäumen fz | 0.04 mm | |
| Max. cutting depth, Side milling | 13 mm | |
| Wet maximum | suitable | |
| Eingriffsbreite max. ae | 0,3×D | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Dry machining | suitable | |
| Holder tolerance class | h6 | |
| Arbor size | 6 | |
| Shank diameter DS | 6 mm | |
| Length of shank LS | 36 mm | |
| Shank type | HB | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Series | Master Steel | |
| Manufacturer’s designation | GARANT Master Steel SlotMachine VHM-Schruppfräser | |
| Tool material | solid carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Cutter diameter Dc | 6 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | d11 | |
| Recess diameter D1 | 5.4 mm | |
| Neck shape | conical | |
| Neck diameter max. D1 max | 5.8 | |
| Cutting edge length Lc | 13 mm | |
| Plunge angle | 10 degrees | |
| Number of effective cutters (peripheral side) Z | 5 | |
| Number of effective cutters (end face) Z | 5 | |
| Twist direction | right-hand | |
| Twist angle | 42 degrees | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer width | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 5 | |
| Cutting media, manufacturer’s designation | VHM ALCRN | |
| Vorschub pro Zahn in | steel < 900 N/mm2 | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Gauge length A | 42 mm | |
| Overall length L | 80 mm | |
| Weight | 28 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | shoulder milling (FEC) | |
| Colour ring | green | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 1 | |
| Cutting depth min. | 0.3 mm | |
| Cutting depth in use | Side milling |
Identification & Classification
| Article number | 701211 | |
| Catalog number | 205556 | |
| EAN / GTIN | 4062406112110 | |
| Manufacturer number | 205556 6 | |
| Article class | 11X | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
180
P
170
P
150
P
130
P
100
M
45
M
30
K
180
Description
Version:
With a new-type knurled profile, optimised for higher feed rates. Improved cutting edge protection thanks to slight edge honing. Tremendous bending strength due to the use of ultra-fine grain substrate.
Advantage:
The tool geometry produces particularly tightly rolled swarf that is discharged via flat chip breaker recesses. As a result, the tool maintains an extremely stable core.
Plunge angle of up to 10° possible thanks to generous recess on the front face.
Plunge angle of up to 10° possible thanks to generous recess on the front face.
Application:
For roughing machining.
Note:
Particularly long neck recess for avoiding interference contours.
With conically increasing recess to guarantee stability at long overhangs.
With conically increasing recess to guarantee stability at long overhangs.