{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide torus cutter, DLC, ⌀ h6 DC / R1: 4/1,0mm
Article no.: 701251
Catalog no.: 206230
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable | |
| Vorschub pro Zahn Besäumen fz | 0.02 mm | |
| Max. cutting depth, Full slot milling | 0.2 mm | |
| Max. cutting depth, Side milling | 11 mm | |
| Wet maximum | suitable | |
| Eingriffsbreite max. ae | 0,5×D; 0,05×D | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Holder shape | plain shank | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Arbor size | 6 | |
| Shank diameter DS | 6 mm | |
| Vorschub pro Zahn Kopierfräsen fz | 0.02 mm | |
| Shank type | HA | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Tool material | solid carbide | |
| Machining group | N (non-ferrous metals); O (other) | |
| Cutter diameter Dc | 4 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | h6 | |
| Recess diameter D1 | 3.7 mm | |
| Cutting edge length Lc | 11 mm | |
| ISO milling cutter type | toroidal bull nose end mill | |
| Balancing quality | G 2,5 | |
| Number of effective cutters (peripheral side) Z | 3 | |
| Twist angle | 45 degrees | |
| Corner / edge | 1 | |
| Corner version | as radius | |
| Corner radius R | 1 mm | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 3 | |
| Tool application group | W | |
| Vorschub pro Zahn in | alu short-chipping | |
| Coating | DLC | |
| Interface | joint 1 | |
| Tolerance class | h6 | |
| Gauge length A | 17 mm | |
| Overall length L | 57 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 6527 | |
| Machining method | form milling (die milling) (FFO); shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | yellow | |
| Type of product | die milling cutter | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Cutting depth in use | Full slot milling; Side milling; copy milling |
Identification & Classification
| Article number | 701251 | |
| Catalog number | 206230 | |
| EAN / GTIN | 4062406127664 | |
| Manufacturer number | 206230 4/1,0 | |
| Article class | 11X | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
480
N
440
N
400
N
200
N
160
N
200
N
150
N
130
N
180
N
160
N
150
N
130
N
160
N
300
N
160
N
200
Description
Version:
With the latest generation of DLC coating sp2.
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.
Tolerances:
R1 > 0.5 − 1.5 tolerance ±0.03.
R1 > 1.5 tolerance ±0.05.
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.
Tolerances:
- Corner radius
R1 > 0.5 − 1.5 tolerance ±0.03.
R1 > 1.5 tolerance ±0.05.
Note:
NEW GENERATION AVAILABLE! Recommended successor product is No. 206255.