{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling CPHX 060210 ER, for precision finishing cutters, HB4015
Article no.: 701483
Catalog no.: 212554
Article code:
Product details
Technical Data
| Wet minimum | suitable | |
| Max. cutting depth ap | 2.5 mm; 2.5 mm | |
| Wet maximum | suitable | |
| Dry machining | suitable | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Base form | rhombic | |
| Thickness of insert S | 2.38 mm | |
| Insert version | right-hand | |
| Height of cutting edge | 2.38 mm | |
| Diameter of insert d | 6.35 mm | |
| Corner radius R | 1 mm | |
| Corner angle | 80 degrees | |
| Normal clearance angle (main cutting edge) | 11 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 11 degrees | |
| Normal clearance angle (flat cutting edge) | 11 degrees | |
| Normal clearance angle, main cutting edge | 11 degrees | |
| ISO-Code | CPHX 060210 ER | |
| Wiper length axial Lwa | 1 mm | |
| Wiper length radial Lwr | 1.5 mm | |
| Cutting depth ap, min. | 0.15 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.25 mm | |
| Feed rate per tooth max. fz | 0.25 mm | |
| Tool material | Carbide | |
| Machining group | H (hard materials); K (cast iron); M (stainless steel); P (steel) | |
| Cutting media, manufacturer’s designation | HB4015 | |
| Coating | PVD | |
| Grade | HB4015 | |
| Insert thickness T | 2.38 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | CPHX 060210 | |
| Insert designation | CPHX 060210 ER | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | cast iron (K); hardened steel (H); stainless steel (M); steel (P) | |
| Tolerance Class | H | |
| Finishing / roughing assignment | finishing | |
| Type of fastening | hole | |
| Cutter version | rounded (E) | |
| Number of potential uses | 2 pcs. | |
| Weight | 1 g | |
| Content | single part | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 701483 | |
| Catalog number | 212554 | |
| EAN / GTIN | 4062406099169 | |
| Manufacturer number | 212554 ST1400 | |
| Article class | 21A | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
400
P
380
P
360
P
340
P
320
H
200
H
250
H
200
M
320
M
300
K
320
Description
Version:
- Inserts with improved wiper geometry for more efficient machine processes in tool and die manufacture.
- Extreme time saving available due to large stepover and high feed rate per tooth.
- Milling inserts with radial and axial wiper geometry.
Concentricity ± 0.020 mm.
Recommendation:
For pure face milling operations, reduce Vc by 30%.
Note:
Standard application values for ae 0.2 mm.
Lwa represents the axial wiper length.
Lwr represents the radial wiper length.
Lwa represents the axial wiper length.
Lwr represents the radial wiper length.