{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling XOMT060310ZZER, for high feed rate indexable face mills, HB4420
Article no.: 701506
Catalog no.: 212852
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | XOMT060310ZZER | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | triangular | |
| Insert width | 6.35 mm | |
| Blade thickness | 3.18 mm | |
| Insert length | 3.34 mm | |
| Insert version | neutral | |
| Cutting edge length | 3.34 mm | |
| Cutting edge height | 3 mm | |
| Insert diameter | 6.35 mm | |
| Corner radius | 1 mm | |
| Corner chamfer length | 1.37 mm | |
| Corner chamfer angle | 18 degrees | |
| Corner angle | 101 degrees | |
| Normal clearance angle (main cutting edge) | 13 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 2.62 mm | |
| ISO-Code | XOMT060310ZZER | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Coating | AlTiCrN | |
| Grade | HB4420 | |
| Insert thickness | 3.18 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | XOMT060310ZZER | |
| Interface coding for insert according to ISO TS 13399-60 | XO0603103N | |
| Insert designation | XOMT060310ZZER | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 3 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); non-ferrous materials (N); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Machining strategy | HPC | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 3 pcs. | |
| Weight | 21 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 701506 | |
| Catalog number | 212852 | |
| EAN / GTIN | 4045197625731 | |
| Manufacturer number | 212852 S | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
S
30
Description
Note:
Standard application values for ae = 0.5...1×D / ap max