{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling XNEX 080610, for indexable milling cutters, HBM20, high feed rate
Article no.: 701522
Catalog no.: 215117
Article code:
Product details
Technical Data
| Wet minimum | suitable only under restricted conditions | |
| Max. cutting depth, Side milling | 1 mm | |
| Max. cutting depth, Full slot milling | 0.6 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Base form | base profile X | |
| Thickness of insert S | 6.35 mm | |
| Diameter of insert d | 12.5 mm | |
| Corner radius R | 1 mm | |
| Rake face chamfer width C | 0.25 mm | |
| Rake face chamfer angle | 15 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Normal clearance angle, main cutting edge | 0 degrees | |
| ISO-Code | XNEX 080610 | |
| Type of chip breaker | UNI | |
| Cutting depth ap, min. | 0.2 mm | |
| Cutting depth ap, max. | 1 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Tool material | Carbide | |
| Machining group, manufacturer-specific | UNI | |
| Machining group | M (stainless steel); P (steel) | |
| Cutting media, manufacturer’s designation | HBM20 | |
| Coating | CVD | |
| Grade | HBM20 | |
| Insert thickness T | 6.35 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | XNEX 0806 | |
| Insert designation | XNEX 080610 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 6 pcs. | |
| Suitable for material | stainless steel (M); steel (P) | |
| Tolerance Class | E | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Number of potential uses | 6 pcs. | |
| Weight | 10 g | |
| Content | single part | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 701522 | |
| Catalog number | 215117 | |
| EAN / GTIN | 4062406103217 | |
| Manufacturer number | 215117 UNI | |
| Article class | 22A | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
280
P
240
P
220
P
200
P
180
M
120
M
95
Description
Version:
6 edges ensure good value for money, due to a low price per cutting edge.
Single-sided 3-edge carbide indexable insert with special geometry for high feed rates.
Programming radius at ap max of 2.4 mm.
Single-sided 3-edge carbide indexable insert with special geometry for high feed rates.
Programming radius at ap max of 2.4 mm.
Note:
ae = 0.6×D / ap = 0.8 mm.
Standard application values for ae = 0.3×D / ap = 3mm.
Standard application values for ae = 0.3×D / ap = 3mm.