{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
HiPer Drill cutter insert m7, HB3040, ⌀ D: 30mm
Article no.: 701581
Catalog no.: 231645
Article code:
Product details
Technical Data
| Wet minimum | suitable only under restricted conditions | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Cooling lubricant | yes | |
| Series | HiPer-Drill | |
| Manufacturer’s designation | HiPer-Drill Schneideinsatz | |
| Cutter diameter min. D | 30 mm | |
| Configurable | no | |
| Distance from cutter corner to cutter tip | 1.59 mm | |
| Number of teeth | 2 | |
| Point angle | 160 degrees | |
| Insert thickness | 10.8 mm | |
| For base body size | 30 mm | |
| Tool material | Carbide | |
| Cutting media, manufacturer’s designation | HB3040 | |
| Coating | TiAlN | |
| Grade | HB3040 | |
| Insert thickness T | 10.8 mm | |
| Tolerance class | m7 | |
| Weight | 62 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Machining method | drilling into solid material (BVB) | |
| Type of product | cutter insert for boring | |
| Content | single part |
Identification & Classification
| Article number | 701581 | |
| Catalog number | 231645 | |
| EAN / GTIN | 4062406163075 | |
| Manufacturer number | 231645 30 | |
| Article class | 21M | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
140
P
120
P
100
K
80
Description
Version:
Vee ground cutter inserts for precise positioning and stable seating.
Concentricity when assembled ≤ 20 µm. For holes up to IT9 accuracy.
Special pyramidal point geometry, optimal spot drilling – even with unstable conditions and long tool overhangs.
Such as when processing sheet metal and steel girders. Also suitable for stack drilling.
Concentricity when assembled ≤ 20 µm. For holes up to IT9 accuracy.
Special pyramidal point geometry, optimal spot drilling – even with unstable conditions and long tool overhangs.
Such as when processing sheet metal and steel girders. Also suitable for stack drilling.
Note:
Cutting data applies for the base body 5×D.
Drill pilot holes exclusively with cutter insert of the same type.
1×D maximum drilling depth without through-coolant.
Drill pilot holes exclusively with cutter insert of the same type.
1×D maximum drilling depth without through-coolant.