{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning VNMG 160404, for medium machining
Article no.: 701929
Catalog no.: 251822
Article code:
New product
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | VNMG 160404 Sorte PR015S | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rhombic | |
| Wide insert | 16.606 mm | |
| Thickness of the insert | 4.76 mm | |
| Length of cutting insert | 16.606 mm | |
| Insert version | neutral | |
| Length of cutting edge | 16.606 mm | |
| Diameter of the cutting insert | 9.525 mm | |
| Corner radius | 0.4 mm | |
| Corner angle | 35 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 15 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| ISO-Code | VNMG160404 | |
| Type of chip breaker | MU | |
| Tool material | Carbide | |
| Tool application group | MU | |
| Cutting media, manufacturer’s designation | PR015S | |
| Coating | Megacoat Hard | |
| Grade | PR015S | |
| Insert thickness | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | VNMG160404 | |
| Interface coding for insert according to ISO TS 13399-60 | VNMG160404 | |
| Insert designation | VNMG160404 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | heat-resistant super-alloys (S) | |
| Tolerance Class | M | |
| Machining method | grooving and parting off (EEA) | |
| Finishing / roughing assignment | finishing; roughing | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 4 pcs. | |
| Weight | 10 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 701929 | |
| Catalog number | 251822 | |
| EAN / GTIN | 4960664837571 | |
| Manufacturer number | TLJ07636 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
S
S
