{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Standard keyway broaching toolholder ⌀ DS 16 mm, from slot width m: 3mm
Article no.: 702230
Catalog no.: 290356
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Cooling lubricant | yes | |
| Type of product | keyway broaching and profile slotting tool | |
| Diameter of blade carrier | 7.8 mm | |
| Diameter of minimum pre-drill | 8.36 mm | |
| Diameter of shaft | 16 mm | |
| Length of shank | 40 mm | |
| Blade carrier radius | 3.9 mm | |
| Gauge length | 30 mm | |
| Centre-line offset | 4.2 mm | |
| Suitable for slot width | 3 mm | |
| Content | single part |
Identification & Classification
| Article number | 702230 | |
| Catalog number | 290356 | |
| EAN / GTIN | 4062406099213 | |
| Manufacturer number | 290356 3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Attention:
Always use the minimum pre-drill ⌀ to match the slot width (e.g. for slot width 14 mm, minimum pre-drill ⌀ = 38.22 mm).
Note:
- Individual holder sizes are for different slot widths. In such cases, where possible, always use the optimum combination of holder and cutting insert (identical size) for maximum stability.
- For lathes without Y-axis, please use eccentric bush No. 290391 − 290393 for exact setting of the Y-coordinate.
- For machining centres, use the pull-up aid No. 290397 and a dial indicator to check the spindle orientation.