{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Performance milling chuck with cooling channel bores, HSK-A 63 short, Clamping ⌀ D1: 6mm
Article no.: 702695
Catalog no.: 304450
Article code:
Click to enlarge image
Click to enlarge image
- Spring in the base body presses the milling cutter or HB shank into the correct position.
- Contact piece on the tightening screw holds the milling cutter in the HB face.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially on bolt circle | |
| Cooling lubricant | yes | |
| Holder type | hollow shank taper HSK | |
| Interface coding | HSK06300195 | |
| Holder shape | with internal centring | |
| Holder version | dimensionless nominal size with cooling | |
| Holder size, no dimensions | 63 | |
| Type of mounting | spigot | |
| Length of shank LS | 32 mm | |
| Min. clamping diameter D1 | 6 mm | |
| Max. clamping diameter D1 | 6 mm | |
| Gauge length A | 65 mm | |
| Outer diameter on the tool side D | 26.5 mm | |
| Body length, tool-end L1 | 39 mm | |
| Concentricity | 3 µm | |
| Balance quality G at rotational speed | g 2.5 at 25,000 rpm | |
| Machining strategy | HPC; HSC | |
| Tightening torque | 10 Nm | |
| Incl. RFID data carrier | no | |
| With cooling channel bore | yes | |
| Number of cooling channel bores | 4 pcs. | |
| Interface | joint 1; joint 2 | |
| Type of product | side lock arbor | |
| Overall height H1 | 26.5 mm | |
| Overall width B1 | 26.5 mm | |
| Standard | DIN 69882-4; DIN 69893; ISO 12164-1 | |
| Shape | A | |
| With hole for RFID data carrier | yes | |
| Through-coolant available | yes | |
| Material | heat-treatable steel | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 702695 | |
| Catalog number | 304450 | |
| EAN / GTIN | 4062406114664 | |
| Manufacturer number | 304450 6 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- With RFID/Balluffchip bore.
- All shanks hard turned.
- Supplied with 4 table cooling channel bores.
Advantage:
- No risk of the cutter being pulled out, not even a tug.
- Optimised external contour − vibration-damping behaviour.
- Pleasant handling thanks to the differential thread.
- Breakage of the milling cutter shank is improbable.
- Precision version.
Application:
For clamping tools with side drive flats to DIN 1835 Form B and DIN 6535 Form HB. Best suited for TPC milling or high feed rate applications. No risk of the cutter being pulled out, more precise radial run-out, process reliability!
Optional extras:
Note:
Tightening torque 10 Nm; Torx size T15.