{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Revolvinglathe centre for interchangeable insert, Type: HSK40
Article no.: 702983
Catalog no.: 320617
Article code:
Product details
Technical Data
| Overall length L | 115 mm | |
| Head diameter D | 44 mm | |
| Type of centring point | tracking | |
| Usable length L2 | 95 mm | |
| Mounting machine-side | HSK 40 | |
| With push-off thread | yes | |
| With clamping faces | yes | |
| With carbide tip | yes | |
| With shock absorbing | yes | |
| Sprung travel | 3 mm | |
| Max. workpiece weight | 300 kg | |
| Maximum speed | 3’000 min-1 | |
| Maximum radial run-out | 0.01 mm | |
| Replaceable centring points included | no | |
| Use | turning | |
| Weight | 0.85 kg | |
| Type of product | centring drill |
Identification & Classification
| Article number | 702983 | |
| Catalog number | 320617 | |
| EAN / GTIN | 4062406127237 | |
| Manufacturer number | 320617 HSK40 | |
| Article class | 31Z | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Sprung version for axial length compensation whilst machining.
- Fully hardened and ground. Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
Flexible application thanks to interchangeable inserts. For general use on turrets and counter-spindles on CNC machines.
Optional extras:
Interchangeable inserts No. 320625.
Note:
Changing the inserts in the key surfaces by counter-rotation.