{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Electronic torque screwdriver, maximum torque: 600cNm
Article no.: 703834
Article code:
Product details
Identification & Classification
| Article number | 703834 | |
| Catalog number | 659005 | |
| EAN / GTIN | 4018754299416 | |
| Manufacturer number | 96510760 | |
| Article class | 63A | |
| Manufacturer/responsible person | STAHLWILLE Eduard Wille GmbH, Lindenallee 27, 42349 Wuppertal, Germany, https://www.stahlwille.de |
Description
Version:
Integral bit ratchet with 80 teeth for a working angle of just 4.5°. This enables fine-step work with screw connections that are difficult to access.
Mechanics with ball mechanism triggers audibly and noticeably when the target torque is reached. After triggering, the sliding mechanism prevents the set tightening torque from being exceeded unintentionally and the screw from being overtightened.
Ergonomically shaped ball handle allows fatigue-free working. A 1/4 inch square drive is incorporated into the end of the handle. Resistant to oils, greases, fuels and brake fluids.
Units of measure: cNm, Nm, lbfft, lbfin, ozf·in
Mechanics with ball mechanism triggers audibly and noticeably when the target torque is reached. After triggering, the sliding mechanism prevents the set tightening torque from being exceeded unintentionally and the screw from being overtightened.
Ergonomically shaped ball handle allows fatigue-free working. A 1/4 inch square drive is incorporated into the end of the handle. Resistant to oils, greases, fuels and brake fluids.
- Three operating modes with visual, acoustic and haptic stop signal.
- Memory capacity: Up to 2500 measured values.
- An integral micro-USB port permits the measurement data to be read and documented at terminals.
- Bright OLED power display, low power consumption places little burden on the battery.
Units of measure: cNm, Nm, lbfft, lbfin, ozf·in
Application:
Torque control; controlled tightening of screws in a single operation or for small batch production.
Standard:
Tested to DIN EN ISO 6789.
Supplied with:
Supplied with a 3.6 V / 2.6 Ah Lithium-ion battery type 18650 (external charging), SENSOMASTER 4 software, micro-USB on a USB-A cable, bit-holder (hexagonal drive D 6.3; 1/4 inch). In a plastic case.
Note:
Suitable charger and charger adapter available on request. Additional batteries can be found under No. 081574 size 2600 or alternatively size 3500.