{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Torque screwdriver with digital display, to take D 6.3 bits, maximum torque: 500cNm
Article no.: 703838
Catalog no.: 659913
Article code:
Product details
Technical Data
| Nominal voltage | 3 V | |
| Number of batteries contained | 1 pcs. | |
| Type of battery | lithium (Li) | |
| Rechargeable | no | |
| Manufacturer’s designation | DigiTorque V2 | |
| Power supply | battery-powered | |
| Colour | red; black; silver | |
| Drive profile | none | |
| Adjustable trigger value | adjustable | |
| Unit of measure for torque | Nm | |
| Min. torque, Nm | 1 | |
| Max. torque, Nm | 5 | |
| Setting the trigger value | digitally adjustable | |
| Bit holder | D 6.3 | |
| Size, bit holder | 1/4 in | |
| Display resolution | 0.05 Nm | |
| Torque unit | Nm; lbf ft | |
| Data can be recorded | no | |
| Trigger principle | mechanical short travel release | |
| Trigger signal | acoustic; haptic | |
| Feedback | acoustic; triggering | |
| Can be calibrated | yes | |
| Content | single part | |
| Type of product | torque screwdriver | |
| Direction of tightening | right-hand | |
| Shape of connection | bit holder | |
| Measurement technology | mechanical | |
| Measuring functions | torque | |
| DIsplay | digital | |
| Torque range min. | 1 Nm | |
| Torque range (max.) | 5 Nm | |
| Torque accuracy clockwise | 6 % | |
| Manufacturer’s test certificate | yes | |
| Standard | DIN EN ISO 6789 | |
| Overall length L | 146.5 mm | |
| Total weight | 117 g |
Identification & Classification
| Article number | 703838 | |
| Catalog number | 659913 | |
| EAN / GTIN | 7610733288953 | |
| Manufacturer number | PB 9320.M 1.0-5.0 NM | |
| Article class | 63D |
Description
Version:
Power grip with non-allergenic elastomer coating allows transmission of the required torque with no problems even with wet or oily hands. On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use. The release torque is higher than the tightening torque (overload protection).
Torque adjustment without using tools just pull the cap and turn it. The torque setting is displayed in a window (digital display at the end of the handle). Built-in electronics with NFC interface. Battery can be replaced by the customer (button cell CR 1/3 N; 3V). Units of measure: Nm, lbfft.
Bit holder with magnet to take C 6.3 bits.
Torque adjustment without using tools just pull the cap and turn it. The torque setting is displayed in a window (digital display at the end of the handle). Built-in electronics with NFC interface. Battery can be replaced by the customer (button cell CR 1/3 N; 3V). Units of measure: Nm, lbfft.
Bit holder with magnet to take C 6.3 bits.
Application:
For controlled tightening of screws to a pre-set torque.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.