{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Electrician's screwdriver for slot-head VDE fully insulated, Blade width b: 2,5mm
Article no.: 703846
Catalog no.: 663301
Article code:
Offers
Product details
Technical Data
| Tested up to | 1,000 V | |
| Quality and test seal | VDE | |
| Guideline / labelling | CE mark; low-voltage Directive | |
| Version | straight | |
| Suitable for voltage testing | yes | |
| Minimum test voltage | 1,000 | |
| Maximum test voltage | 1,000 | |
| Blade length | 75 mm | |
| Handle properties | ergonomic; non-slip | |
| Type of handle | standard handle | |
| Blade height | 0.4 mm | |
| Blade width | 2.5 mm | |
| Type of product | screwdriver | |
| Material | special steel / special alloy | |
| Surface | bright finish | |
| Standard | DIN EN 60900; VDE 0682-201 | |
| Overall length | 162 mm | |
| Set | no | |
| Drive | handle | |
| Output drive | for slotted screws (SL) | |
| Content | single part |
Identification & Classification
| Article number | 703846 | |
| Catalog number | 663301 | |
| EAN / GTIN | 4062406059668 | |
| Manufacturer number | 663301 2,5 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Handle and blade fully insulated up to 1000 V to DIN EN IEC 60900 / VDE 0682-201.
Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Multi-component power handle with grip zone optimised for torque and comfort. Blade of high-alloy tool steel. From size 5.5 the outside ⌀ of the insulation is the same as the tip width (helpful when working in narrow spaces).
Blades with taper tips, manufactured to the standard dimensions of slots on the screws. Fully insulated, the breakdown strength of the insulation is many times the minimum test voltage set by VDE. Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Multi-component power handle with grip zone optimised for torque and comfort. Blade of high-alloy tool steel. From size 5.5 the outside ⌀ of the insulation is the same as the tip width (helpful when working in narrow spaces).
Blades with taper tips, manufactured to the standard dimensions of slots on the screws. Fully insulated, the breakdown strength of the insulation is many times the minimum test voltage set by VDE. Each of these screwdrivers is individually tested in a water bath for insulation breakdown under high voltage.
Application:
For use at voltages up to 1000 V.
Optimum working life for electrician’s screwdrivers is assured if screwdrivers always exactly match the standard screw slot size. (see tables part). Incorrect screwdriver size selection will cause damage to the screw head.
Optimum working life for electrician’s screwdrivers is assured if screwdrivers always exactly match the standard screw slot size. (see tables part). Incorrect screwdriver size selection will cause damage to the screw head.