{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
KLEIBERIT 510.3 PUR glue strong 0,8kg
Article no.: 712400
Catalog no.: 98024
Article code:
Product details
Technical Data
| Inhalt | 0.8 kg | |
| Beanspruchungsgruppe (DIN EN 204) | D4 | |
| Offene Zeit | ca 30 Minuten | |
| Gebinde | Flasche | |
| Farbe | weiss | |
| Basis | Polyurethan | |
| Signalwort | Gefahr | |
| Gefahrenhinweise | H332 Gesundheitsschädlich bei Einatmen.; H315 Verursacht Hautreizungen.; H319 Verursacht schwere Augenreizung.; H334 Kann bei Einatmen Allergie, asthmaartige Symptome oder Atembeschwerden verursachen.; H317 Kann allergische Hautreaktionen verursachen.; H351 Kann vermutlich Krebs erzeugen.; H335 Kann die Atemwege reizen.; H373 Kann die Organe schädigen bei längerer oder wiederholter Exposition. |
Identification & Classification
| Article number | 712400 | |
| Catalog number | 98024 | |
| EAN / GTIN | 4027616026183 | |
| Manufacturer number | 510.3.3081 |
Description
Description:
Strong 1C PUR adhesive, high resistance and medium open time
Application Area:
- General surface and finger-joint bonding of wooden components
- Window and door element production
- Layer bonding of wood-based materials
- Bonding of mineral panel materials and rigid foams
Application Notes:
The room and material temperature must be at least +20°C. For load-bearing bonds, the wood moisture content must be between 8% and 15%. The wood moisture specifications of the applicable building product standards must be complied with. For non-load-bearing bonds, the wood moisture content should be at least 6% and no more than 15%, depending on the application. The bonding surfaces must be clean, free of grease and release agents.
One-sided application of adhesive is sufficient. The required application quantity depends on the material properties of the materials to be bonded and the tolerances or joint thicknesses depending on the individual case. The maximum joint thickness must not exceed 0.3 mm.
One-sided application of adhesive is sufficient. The required application quantity depends on the material properties of the materials to be bonded and the tolerances or joint thicknesses depending on the individual case. The maximum joint thickness must not exceed 0.3 mm.