{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
PRECIMAR ICM 100 IP dial indicator test device, Type: ICM100IP
Article no.: 716688
Catalog no.: 404295
Article code:
Product details
Technical Data
| Power supply | Mains operated | |
| Colour camera | yes | |
| Measuring range | 100 mm | |
| Measurement technology | Incremental | |
| Scale divisions | 2 µm | |
| Uncertainty of measurement (of end value) | (0.2 + l/250) µm | |
| Positioning speed | 4 mm/s | |
| Positioning | automatic | |
| Camera | USB 3.0 CMOS camera | |
| Type of product | Setting master |
Identification & Classification
| Article number | 716688 | |
| Catalog number | 404295 | |
| EAN / GTIN | 2050002080324 | |
| Manufacturer number | 5351010 | |
| Manufacturer/responsible person | MAHR GmbH Göttingen, Carl-Mahr-Straße 1, 37073 GÖTTINGEN, Germany, www.mahr.de |
Description
Version:
Dial indicator test device for quick testing of dial indicators and simple operation of testing of dial indicators or precision dial comparators. A powerful camera takes over the stressful error-prone reading of the displayed values. The associated software controls the test device for you and checks that the data readings match the specified reference values.
Advantage:
- Comfortable and intuitive one-handed operation, no tools required.
- Very high measuring accuracy thanks to compliance with Ernst Abbe's comparator principle.
- Testing to international standard and guidelines such as DIN, VDI, GOST, BS, NF, ASME and JIS.
- High-quality USB 3.0 industrial camera with high image quality and large dynamic range.
- High-resolution lens with low distortion – for error-free determination of the measured values.
- Sturdy LED lighting suitable for an industrial environment, unaffected by daylight.
- Digital characters can be read directly – no cable connection to the measuring tool.
- A wide palette of measuring tools can be tested, including dial indicators with diameters up to 100 mm.
- Inductive probes from various manufacturers can be tested (only in manual mode).
- Nominal sizes and tolerances of pre-programmed inspection tools are directly available.
- Direct application range up to 100 mm – no need for resetting during measurement