{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Wet film separating agent containing silicone SR Multi, Contents: 500ml
Article no.: 719209
Catalog no.: 083089
Article code:
Product details
Technical Data
| Manufacturer’s designation | SR Multi | |
| Labelling of hazardous substances | GHS 02 - flammable; GHS 07 - Health hazard; GHS 09 - hazardous to the environment | |
| Colour | transparent | |
| Content | 500 ml | |
| Spray head, spray can | standard | |
| Type of product | separating agent | |
| Contents unit | millilitres | |
| Version | spray can | |
| Shape | liquid | |
| Max. operating temperature | 200 °C | |
| Characteristics | anti-adhesion properties | |
| Content | single part |
Identification & Classification
| Article number | 719209 | |
| Catalog number | 083089 | |
| EAN / GTIN | 5412386064975 | |
| Manufacturer number | 32836-AA | |
| Manufacturer/responsible person | CRC Industries Deutschland GmbH, Südring 9, 76473 Iffezheim, Germany, www.crcind.com |
Description
Version:
General-purpose moulded part separating agent containing silicone, for plastics processing. Outstanding separating performance on thermoset resins and thermoplastics, and also on many types of rubber.
- Excellent separation and anti-friction effect.
- Improves surface quality.
- Reduces scrap rates for machining if plastic moulded parts, and increases productivity.
- Does not accumulate in the mould.
- Operating temperature range up to 200°C.
Application:
To assist the release of plastic and rubber moulded parts from the injection mould, in vacuum forming and many other processes for plastics processing. As anti-friction and separating agent for sliding tracks, textiles, foams etc.
- Apply a thin even film to the clean dry mould at a distance of 25 – 30 cm.
- Wait a short time until the solvent has evaporated.
- If necessary, repeat the procedure after some time.
- Refer to the current safety data sheet (SDB) for safety instructions.
Note:
Contains silicone, which achieves a high and sustained separation effect. On some cases this may have a negative effect on the moulded parts regarding adhesion of paints, coating or adhesives.