{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Cut-resistant arm protection Cut D, Length: 45cm
Article no.: 721008
Catalog no.: 094585
Article code:
Product details
Technical Data
| Colour, grey | Grey blue | |
| Manufacturer’s designation | GARANT Cut D | |
| Quality and test seal | Oeko-Tex® Standard 100 | |
| Contents in pieces | 2 pcs. | |
| Cut protection class, EN 388 | D | |
| Version, EN 388 | EN388:2016 | |
| Resistance to abrasion | 4 | |
| Resistance to cuts (Coupe test) | X | |
| Tear propagation resistance | 4 | |
| Resistance to penetration | X | |
| Resistance to cuts (TDM) | D | |
| Impact protection | not defined | |
| EN 388 code | 4X4XD | |
| Colour | grey | |
| Type of product | arm protection | |
| Area of application | cut protection | |
| Glove size | 9 | |
| Closure | hook-and-loop fastener | |
| Reuse | reusable | |
| Unit | pieces | |
| Knitted technology (fineness) | 13G | |
| Standard | EN 388; EN ISO 21420 | |
| Backing material | high-performance polyethylene (HPPE) | |
| Coating | no coating | |
| Lined | no | |
| Characteristics | DMF free; with thumb hole | |
| Protection category | II | |
| Overall length | 460 mm |
Identification & Classification
| Article number | 721008 | |
| Catalog number | 094585 | |
| EAN / GTIN | 4062406275464 | |
| Manufacturer number | 094585 45 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
GARANT Cut D. Arm protection pair with cut protection level D for work that involves high cut hazards. With thumb hole. The hook and loop fastener at the end of the arm protection provides additional safety and an even better fit.
Standard:
EN 388; EN ISO 21420
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Protect arms against mechanical risks, abrasions and cutting hazards.
- Can be combined with cut-resistant glove.
- Optimum protection is obtained only when the area to be protected is completely covered. Where arm protectors have hook and loop fasteners, check that these are securely closed. The arm protector must not be allowed to slip.
Reasonably foreseeable misuse
- Offers no protection against chemical, microbiological, thermal or electrical hazards.
- Do not wear when close to rotating machine parts.
- Do not continue using following contact with sharp-edged items.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.