{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Tap machine tap Form B, AlTiX, M: M2,3
Article no.: 722386
Catalog no.: 132721
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00282105 | |
| Holder tolerance class | h9 | |
| Shank diameter | 2.8 mm | |
| Length of shank | 31 mm | |
| Oil | suitable | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | GARANT Master Tap Maschinen-Gewindebohrer Form B | |
| Thread type | M | |
| Nominal diameter of metric thread | 2.3 mm | |
| Thread | M2,3x0,4-6HX | |
| Thread pitch | 0.4 mm | |
| Thread tolerance class | ISO 2X 6HX | |
| Chisel edge diameter | 1.86 mm | |
| Length of tapping part | 9 mm | |
| Tap infeed length | 1.6 mm | |
| Taper lead angle | 8 degrees | |
| Number of teeth | 2 | |
| Twist direction | neutral, straight | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Taper lead form | B | |
| Cutting part version | with lubrication groove and dirt trap groove | |
| Application for type of drilling | through hole | |
| To depth (x diameter) | 3 | |
| Number of clamping slots | 2 | |
| Core hole diameter | 1.9 mm | |
| Core hole diameter guideline value | 1.9 mm | |
| Flank angle | 60 degrees | |
| Reinforced shank | yes | |
| Square-drive width across flats | 2.1 mm | |
| 45 mm | ||
| Tool material | HSS-E-PM | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Cutting media, manufacturer’s designation | HSS-E-PM | |
| Coating | AlTiX | |
| Interface | joint 1 | |
| Usable length | 6.9 mm | |
| Overall length | 45.9 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 371 | |
| Data carriers | without data carrier | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | green | |
| Type of product | taps | |
| Content | single part |
Identification & Classification
| Article number | 722386 | |
| Catalog number | 132721 | |
| EAN / GTIN | 4045197984135 | |
| Manufacturer number | 132721 M2,3 | |
| Article class | 11I | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
30
N
35
N
20
P
30
P
30
P
25
P
12
P
8
M
10
M
8
K
20
N
20
Description
Version:
Corresponds to ISO 2X/6HX.