{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Tap machine tap HSS-E-PM, AlTiX, UNF: 3/4-16
Article no.: 722477
Catalog no.: 138010
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Holder tolerance class | h9 | |
| Shank diameter DS | 14 mm | |
| Oil | suitable | |
| Cooling lubricant | yes | |
| Series | Master Tap | |
| Thread type | UNF | |
| Cutter diameter D | 19.05 mm | |
| Nominal diameter of inch thread D | 0.75 in | |
| Thread D | 3/4-16UNF-2BX | |
| Thread pitch | 1.588 mm | |
| Turns per inch | 16 | |
| Thread tolerance class | 2BX | |
| Taper lead angle | 15 degrees | |
| Number of teeth | 4 | |
| Twist direction | right-hand | |
| Twist angle | 40 degrees | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Taper lead form | C | |
| Application for type of drilling | blind hole | |
| To depth (x diameter) | 2.5 | |
| Number of clamping slots | 4 | |
| Core hole diameter | 17.5 mm | |
| Core hole diameter guideline value | 17.5 mm | |
| Flank angle | 60 degrees | |
| Reinforced shank | no | |
| Square-drive width across flats □ | 11 mm | |
| Normlänge L | 110 mm | |
| Tool material | HSS-E-PM | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Cutting media, manufacturer’s designation | HSS-E-PM | |
| Coating | AlTiX | |
| Interface | joint 1 | |
| Usable length L1 | 47.63 mm | |
| Overall length L | 110 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 374 | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | green | |
| Type of product | taps | |
| Content | single part |
Identification & Classification
| Article number | 722477 | |
| Catalog number | 138010 | |
| EAN / GTIN | 4045197901811 | |
| Manufacturer number | 138010 3/4-16 | |
| Article class | 11I | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
30
N
35
N
20
P
30
P
30
P
25
P
12
P
8
M
10
M
8
K
20
N
20
Description
Version:
GARANT Master Tap Universal tap, designed for use in a wide spectrum of materials with high process reliability.
- HSS-E-PM tool material for maximum wear resistance.
- Reduced coefficient of friction due to the new high-performance coating.
- Special geometry for optimum swarf evacuation.
Application:
For UNF uniform fine threads ASME − B1.1.