{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Alu solid carbide milling cutter with more chip separators TPC, DLC, ⌀ h6 DC: 5mm
Article no.: 723326
Catalog no.: 203113
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable only under restricted conditions | |
| Max. cutting depth, Side milling | 17 mm | |
| Wet maximum | suitable | |
| Eingriffsbreite max. ae | 0,15×D | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00600105 | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 6 mm | |
| Dry machining | suitable | |
| Type of mounting | spigot | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 6 mm | |
| Length of shank LS | 38.1 mm | |
| Shank type | HA | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Series | Master Alu | |
| Manufacturer’s designation | GARANT Master Alu VHM-Fräser mit mehr Spanteilern | |
| Tool material | solid carbide | |
| Machining group | N (non-ferrous metals); O (other) | |
| Cutter diameter Dc | 5 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | h6 | |
| Recess diameter D1 | 4.5 mm | |
| Cutting edge length Lc | 17 mm | |
| Shoulder length | 24 mm | |
| Balancing quality | G 2,5 | |
| Number of effective cutters (peripheral side) Z | 4 | |
| Number of effective cutters (end face) Z | 4 | |
| Twist direction | right-hand | |
| Twist angle | 38 degrees | |
| Corner / edge | 1 | |
| Corner version | as radius | |
| Corner radius R | 0.05 mm | |
| Spacing of the cutters | unequal spacing | |
| Cutting arc angle max. | 45.57 degrees | |
| Number of chip separators | 2 | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 4 | |
| Tool application group | W | |
| Cutting media, manufacturer’s designation | VHM | |
| Coating | DLC | |
| Interface | joint 1 | |
| Tolerance class | h6 | |
| Gauge length A | 24 mm | |
| Overall length L | 65 mm | |
| Functional length | 24 mm | |
| Max. speed | 45’000 min-1 | |
| Weight | 21.1 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Data carriers | without data carrier | |
| Machining method | circular milling (round milling) (FZI); hobbing (FWA); shoulder milling (FEC) | |
| Colour ring | yellow | |
| Machining strategy | TPC | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 3 | |
| Cutting depth min. | 0.03 mm | |
| Cutting depth in use | Side milling |
Identification & Classification
| Article number | 723326 | |
| Catalog number | 203113 | |
| EAN / GTIN | 4062406245740 | |
| Manufacturer number | 203113 5 | |
| Article class | 11X | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
550
N
500
N
450
N
200
N
160
N
200
N
150
N
130
N
180
N
160
N
150
N
130
N
160
N
300
N
160
N
200
Description
Version:
Specially designed for TPC high-performance milling. Optimised bending strength due to the use of ultra-fine grain substrates. 1×D chip separator for controlled chip breaking.
Balanced for very high process reliability and protecting the machine at high speeds.
Balanced for very high process reliability and protecting the machine at high speeds.
Application:
Especially for milling aluminium and non-ferrous metals.
Note:
hmax: The values stated in the table are maximum values.
aemax = 0.15×D for TPC machining.
aemax = 0.15×D for TPC machining.