{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Steel solid carbide ball nose slot drill HPC, TiAlN, ⌀ f8 DC / D S: 20mm
Article no.: 723536
Catalog no.: 207242
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable only under restricted conditions | |
| Vorschub pro Zahn Besäumen fz | 0.15 mm | |
| Max. cutting depth, copy milling | 0.6 mm | |
| Wet maximum | suitable | |
| Eingriffsbreite max. ae | 0,03×D | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL02000105 | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 20 mm | |
| Dry machining | suitable | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 20 mm | |
| Length of shank LS | 50 mm | |
| Vorschub pro Zahn Kopierfräsen fz | 0.2 mm | |
| Shank type | HA | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Series | Master Steel | |
| Manufacturer’s designation | GARANT Master Steel VHM-Vollradiusfräser | |
| Tool material | solid carbide | |
| Machining group | H (hard materials); K (cast iron); M (stainless steel); P (steel) | |
| Cutter diameter Dc | 20 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | f8 | |
| Cutting edge length Lc | 26 mm | |
| Number of effective cutters (peripheral side) Z | 2 | |
| Number of effective cutters (end face) Z | 2 | |
| Twist direction | right-hand | |
| Twist angle | 28 degrees | |
| Corner / edge | 1 | |
| Corner version | as radius | |
| Corner radius R | 10 mm | |
| Radius R | 10 mm | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 2 | |
| Tool application group | N | |
| Cutting media, manufacturer’s designation | VHM ALCRN | |
| Vorschub pro Zahn in | steel < 900 N/mm2 | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Tolerance class | f8 | |
| Usable length L1 | 26 mm | |
| Overall length L | 92 mm | |
| Functional length | 26 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Data carriers | without data carrier | |
| Machining method | copy milling; form milling (die milling) (FFO); profile milling (FPR) | |
| Colour ring | green | |
| Machining strategy | HPC | |
| Type of product | die milling cutter | |
| Content | single part | |
| Correction factor fz | 1 | |
| Cutting depth min. | 0.01 mm | |
| Cutting depth in use | copy milling |
Identification & Classification
| Article number | 723536 | |
| Catalog number | 207242 | |
| EAN / GTIN | 4062406285081 | |
| Manufacturer number | 207242 20 | |
| Article class | 11X | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
270
P
240
P
220
P
190
P
170
H
140
M
90
M
80
K
400
Description
Version:
Precision ground for very high accuracy requirements.
Tolerance: Radius contour = ±0.005 mm.
Improved cutting edge protection thanks to slight edge honing. Tremendous bending strength due to the use of ultra-fine grain substrate.
Tolerance: Radius contour = ±0.005 mm.
Improved cutting edge protection thanks to slight edge honing. Tremendous bending strength due to the use of ultra-fine grain substrate.