{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling XOMU094812ZZER, for high feed rate indexable face mills, HB4030
Article no.: 723633
Catalog no.: 213025
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | XOMU094812ZZER | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | square | |
| Wide insert | 4.579 mm | |
| Thickness of the insert | 5.052 mm | |
| Length of cutting insert | 9.625 mm | |
| Insert version | neutral | |
| Length of cutting edge | 4.579 mm | |
| Height of cutting edge | 4.8 mm | |
| Diameter of the cutting insert | 9.625 mm | |
| Corner radius | 1.2 mm | |
| Corner angle | 60 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 2 degrees | |
| Setting angle | 18 degrees | |
| Normal clearance angle (main cutting edge) | 11 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 8 degrees | |
| Normal clearance angle, main cutting edge | 11 degrees | |
| Radius of main cutting edge | 0 mm | |
| ISO-Code | XOMU094812ZZER | |
| Attachment hole diameter | 3.35 mm | |
| Tool material | Carbide | |
| Machining group | P (steel) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | HB4030 | |
| Coating | TiCn-Al2O3 | |
| Grade | HB4030 | |
| Insert thickness | 5.052 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | XO0948120R | |
| Interface coding for insert according to ISO TS 13399-60 | XO0948120R | |
| Insert designation | XOMU094812ZZER | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 6 pcs. | |
| Direction of action | neutral | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Number of potential uses | 6 pcs. | |
| Weight | 45 g | |
| Content | 1 pcs. | |
| Correction factor | 2.5 |
Identification & Classification
| Article number | 723633 | |
| Catalog number | 213025 | |
| EAN / GTIN | 4062406266561 | |
| Manufacturer number | 213025 ST1400 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
240
P
220
Description
Version:
Innovative indexable insert concept with double-sided indexable inserts with 3 cutting edges (2×3 cutting edges). High-performance tool material for particularly high cost-effectiveness.
Note:
Standard application values for ae = 0.5...1×D / ap max