{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
HiRunER precision ER collet chuck, SK 40 A = 100, for ER collet size: 11M
Article no.: 724546
Catalog no.: 300643
Article code:
Product details
Technical Data
| Entry of cooling lubricant | with cooling lubricant entry, radially before holder | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Series | HiRunER | |
| Manufacturer’s designation | HiRunER Präzisions-ER-Spannzangenfutter | |
| Holder type | iSO taper | |
| Interface coding | SKG04001795 | |
| Holder shape | steep taper DIN ISO 7388-1 | |
| Holder version | dimensionless nominal size without cooling | |
| Holder size, no dimensions | 0400 | |
| Type of mounting | spigot | |
| Shank length | 100 mm | |
| Interface on machine side | SK 40 | |
| Min. clamping diameter | 0.5 mm | |
| Max. clamping diameter | 7 mm | |
| For collet type | ER collet | |
| Collet size | 11 | |
| Gauge length | 100 mm | |
| External diameter of clamping nut | 21.3 mm | |
| Max. speed | 25,000 min-1 | |
| Concentricity | 3 µm | |
| Balance quality G at rotational speed | g 2.5 at 25,000 rpm | |
| Machining strategy | HPC; HSC | |
| Vibration damping | yes | |
| Interface | joint 1; joint 2 | |
| Type of product | collet chucks | |
| Overall length | 168.4 mm | |
| Overall height | 16 mm | |
| Overall width | 16 mm | |
| Standard | ISO 7388-1 | |
| Shape | ADB | |
| With hole for RFID data carrier | yes | |
| Through-coolant available | no | |
| Material | heat-treatable steel | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 724546 | |
| Catalog number | 300643 | |
| EAN / GTIN | 4062406241483 | |
| Manufacturer number | 300643 11M | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
External and internal tapers are ground. All shanks are hard turned for smooth running. Including RFID/Balluffchip bore, high-performance clamping nut up to 25000 rpm.
Advantage:
- 3 µm radial run-out with a 2 µm clamping nut, 6 µm radial run-out with a 5 µm clamping nut.
- Extremely strong holding force (up to factor 2better than the standard ER chuck).
- Vibration reduction effect due to 2-part clamping nut (size 11M and 16M 1-piece).
Application:
For clamping tools with plain shank in collets to DIN 6499 - Form A and B.
Supplied with:
Precision clamping nut.
Optional extras:
Pull studs (PS) No. 308600 – 308806, PS wrenches No. 308820 – 308835, ER chuck keys No. 309757, 309758 (for 11M and 16M); ER collets Fahrion No. 308901 − 309434. ER collets No. 308901 − 309432, hook spanner No. 628400 or torque wrench No. 309749 or 628520.
Note:
- Clamps only nominal ⌀ up to shank ⌀ tolerance h 10.
- Do not use the clamping nut in combination with a sealing washer.
- Use in combination with Fahrion collets.
- The blue design ring must be removed for Fahrion HP 2μm ER collets.
Use the precision collet chuck always in conjunction with the precision clamping nut No. 309617.