{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Extra slim collet sealed, Nominal clamping ⌀ d: 5mm
Article no.: 724854
Catalog no.: 309573
Article code:
Product details
Technical Data
| Series | HOG | |
| Manufacturer’s designation | Spannzange extra schlank | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 8,5 mm | |
| Shank diameter | 8.5 mm | |
| Shank length | 50 mm | |
| External diameter | 10.1 mm | |
| Length of collet | 50 mm | |
| Shape | conical | |
| Standard | DIN 6499 | |
| Material | steel | |
| Surface | ground; hardened | |
| With thread | yes | |
| Clamping face version | ground | |
| Clamping profile | round | |
| With axial compensation | no | |
| With radial compensation | no | |
| Collet version | draw-in collet | |
| With seal | yes | |
| Through-coolant available | no | |
| With length adjustment | no | |
| Tool pull-out protection | no | |
| Interface | joint 1 | |
| Type of product | collet | |
| Content | single part |
Identification & Classification
| Article number | 724854 | |
| Catalog number | 309573 | |
| EAN / GTIN | 4250261519612 | |
| Manufacturer number | 136 0605 000 T | |
| Manufacturer/responsible person | Albrecht Präzision GmbH & Co. KG, Antoniusstraße 25, 73249 Wernau (Neckar), Germany, www.albrecht-bohrfutter.de |
Description
Version:
Through hardened and ground. Extremely slim design. The collet is drawn into the taper seating by a threaded connection from behind through the chuck. Reduced distortion due to elimination of the clamping nut.
With special coating for higher holding torque.
With special coating for higher holding torque.