{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Drill chuck with keyless locking mechanism Extra RV Metal version, Type: 13-1/2
Article no.: 725025
Catalog no.: 342204
Article code:
Product details
Technical Data
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | no | |
| Manufacturer’s designation | Extra RV Metallausführung | |
| Interface position | on the machine | |
| Holder type | screw holder | |
| Nominal size of mounting thread | 1/2 -20 UNF | |
| Holder version | inch size | |
| Holder size, imperial | 1/2 in | |
| Type of mounting | tapped hole | |
| Shank length | 60.9 mm | |
| Interface on machine side | Plain shank | |
| Min. clamping diameter | 1.5 mm | |
| Max. clamping diameter | 13 mm | |
| External diameter, tool-end | 42.4 mm | |
| Drill head length closed | 60.9 mm | |
| Drill head length open | 51 mm | |
| Format | short | |
| Keyless locking mechanism | yes | |
| Thread | M5; M6 | |
| Interface | joint 1 | |
| Type of product | drill chuck | |
| Overall length | 60.9 mm | |
| Overall height | 60.9 mm | |
| Overall width | 42.4 mm | |
| Standard | DIN 6349 | |
| With thread | yes | |
| Through-coolant available | no | |
| Material | steel | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 725025 | |
| Catalog number | 342204 | |
| EAN / GTIN | 4019208450308 | |
| Manufacturer number | 1322451 | |
| Manufacturer/responsible person | Röhm GmbH, Heinrich-Röhm-Straße 50, 89567 Sontheim/BRZ, Germany, www.roehm.biz |
Description
Version:
- Keyless drill chuck with self-tightening locking mechanism. No additional locking required (not even for impact drilling).
- Very ergonomic, user-friendly, hexagon flats for wrench assistance.
- Good concentricity.
- Through hole version for right-hand and left-hand operation (thread M5 or M6).
Equipped with start inhibit.
Single-piece drill chuck; the drill chuck can be opened with one hand when the spindle of the drilling machine is stopped. Extremely short design.