{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Compact clamp, Reach A: 47mm
Article no.: 725168
Catalog no.: 370143
Article code:
Product details
Technical Data
| Max. reach A | 47 mm | |
| Thread M | M12 | |
| T-slot width | 14 mm | |
| Type of product | compact clamp | |
| Length of base body L3 | 95 mm | |
| Width of base body B3 | 40 mm | |
| Height of base body H3 | 81 mm | |
| Min. clamping range D3 min | 0 mm | |
| Max. clamping range D3 max | 90 mm | |
| Max. torque | 105 Nm | |
| Max. clamping force F | 16 kN | |
| With screw / thread | yes | |
| For T-slots | yes | |
| Material | heat-treatable steel | |
| Content | single part |
Identification & Classification
| Article number | 725168 | |
| Catalog number | 370143 | |
| EAN / GTIN | 4062406233136 | |
| Manufacturer number | 370143 47 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Advantage:
- Compact design, dirt-repellent and chip-repellent.
- Height scale permits quick pre-setting of the clamping height.
- Captive pressure piece. Pressure piece adapters are attached by a magnetic insert.
- Easy assembly using the clamping arm.
Material:
Body and pressure arm of heat treatable steel.
Supplied with:
Compact clamp, T-nut for width 14 mm and screw M12.
Optional extras:
Pressure piece set No. 370148.
Warning:
Intended use
Reasonably foreseeable misuse
- Clamping device for mounting on grid plates and machine tables with T-slots.
- For clamping workpieces with a clamping force up to 16 kN.
- Can be combined with a riser block (80 mm) article no. 370146 80.
- Can be combined with pressure pieces article no. 370148 3.
- When drilling and milling, restrain the sideways forces of the workpiece that occur, using suitable stops.
- Position riser blocks vertically above each other, not in a stepped configuration.
Reasonably foreseeable misuse
- Do not exceed the specified torques.
- Do not exceed an ambient temperature of 110 °C.
- Do not make any unauthorised changes or modifications to it.
- Do not use in explosion hazard areas.
- Do not mount components not in accordance with the specification.