{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Grid vacuum plate Venturi system, Type: VRV0
Article no.: 725192
Catalog no.: 384900
Article code:
Product details
Technical Data
| Maximum working pressure | 8 bar | |
| Manufacturer’s designation | Raster-Vakuumplatte Venturi-System, Typ: VRV0 | |
| EX area | no | |
| Power supply | pneumatic | |
| Length | 200 mm | |
| Width | 125 mm | |
| Height | 21 mm | |
| Interval for vacuum slit | 12.5 mm | |
| Min. operating pressure | 3.5 bar | |
| Max. operating pressure | 8 bar | |
| Type of product | clamping plate | |
| Clamping type | vacuum | |
| With thread | no | |
| Clamping face flatness | 0.5 mm | |
| Content | single part |
Identification & Classification
| Article number | 725192 | |
| Catalog number | 384900 | |
| EAN / GTIN | 4062406256425 | |
| Manufacturer number | 384900 VRV0 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Aluminium, steel blue anodised. Operating pressure 3.5 − 8 bar. The final vacuum is approx. 80 mbar (92 % vacuum). Integral noise muffler reduces the noise generation. Height tolerance ± 0.5 mm.
Advantage:
Low-cost entry-level system. Low maintenance costs. Ready for immediate use.
Application:
For use on machine vices. Especially thin components can be clamped flexibly and with little trouble.
Supplied with:
Back-stop discs, compressed air hose ⌀ 10 mm (1 m), Venturi nozzle (1 pc.).
Sealing cord ⌀ 4 mm (10 m).
Sealing cord ⌀ 4 mm (10 m).
Note:
When using Venturi nozzles, we advise against machining using coolant emulsion.
Warning:
Intended use
Reasonably foreseeable misuse
Intended use
Reasonably foreseeable misuse
Intended use
Reasonably foreseeable misuse
- To clamp and secure workpieces with simple shapes and rough surfaces.
- suitable for 5-face machining, but no rotary or pivoting movement of the machine table permissible (restricted by hoses).
- For work in industrial environments.
- Use only when it is technically in good condition and safe to operate.
Reasonably foreseeable misuse
- Do not use in explosion hazard areas.
- Do not make any unauthorised modifications.
Intended use
- To clamp and secure workpieces with simple shapes and rough surfaces.
- suitable for 5-face machining, but no rotary or pivoting movement of the machine table permissible (restricted by hoses).
- For work in industrial environments.
- Use only when it is technically in good condition and safe to operate.
Reasonably foreseeable misuse
- Do not use in explosion hazard areas.
- Do not make any unauthorised modifications.
Intended use
- To clamp and secure workpieces with simple shapes and rough surfaces.
- For work in industrial environments.
- Use only when it is technically in good condition and safe to operate.
Reasonably foreseeable misuse
- Do not use in explosion hazard areas.
- Do not make any unauthorised modifications.