{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Bit ratchet plug-in head, Bit-holder: 1/4in
Article no.: 726559
Catalog no.: 657932
Article code:
Product details
Technical Data
| Size of drive output, bit holder | 1/4 inch | |
| Height | 12.4 mm | |
| Width | 17.5 mm | |
| Pitch | 17.5 mm | |
| Drive size | 9×12 | |
| Type of product | ratchet wrenches | |
| Number of teeth (detent) | 60 | |
| Direction of rotation changed using | changeover lever | |
| Long-term rated loading | 15 Nm | |
| Drive | square profile | |
| Output drive | bit holder | |
| Telescopic function | no | |
| Material of tool | chromium vanadium steel | |
| Surface of tool | chrome-plated | |
| Content | single part |
Identification & Classification
| Article number | 726559 | |
| Catalog number | 657932 | |
| EAN / GTIN | 4062406229641 | |
| Manufacturer number | 657932 1/4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Drop-forged; all plug-in heads = Rectangular shank with spring retaining pin. This ensures a solid and secure fit of the plug-in head in the torque wrench.
Ratchet reversible for clockwise / anticlockwise tightening.
Ratchet reversible for clockwise / anticlockwise tightening.
Application:
To take bits with hexagon shank to DIN ISO 1173 C 6.3 and E 6.3 (1/4 inch).
Material:
Chrome vanadium steel, chrome-plated.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Suitable for:
Torque wrench with rectangular sockets.
Note:
The rated load on this plug-in head is limited to the corresponding jaw width, and may be less than that of the torque wrench.
Please note the pitch of the plug-in head and match this to that of the adjustment tool (see test certificate/operating instructions of the torque wrench you are using). If these vary, correct the pitch!
Please note the pitch of the plug-in head and match this to that of the adjustment tool (see test certificate/operating instructions of the torque wrench you are using). If these vary, correct the pitch!