{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Coltogum Universal Foam 250ml
Article no.: 730516
Catalog no.: 2280
Article code:
Product details
Technical Data
| Content | 250 ml | |
| Pack | Can | |
| Paintable / Sandable | yes | |
| Colour | beige | |
| Base | Polyurethan | |
| Rainproof | yes | |
| Processing temperature | +5°C bis +35°C | |
| Elasticity | not elastic | |
| Signal word | Danger | |
| Application range | inside + outside | |
| Hazard warnings |
H222 Extremely flammable aerosol.; H229 Pressurized container: may burst if heated; H351 Suspected of causing cancer; H317 May cause an allergic skin reaction.; H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.; H319 Causes serious eye irritation.; H315 Causes skin irritation.; H335 May cause respiratory irritation.; H373 May cause damage to organs |
Identification & Classification
| Article number | 730516 | |
| Catalog number | 2280 | |
| EAN / GTIN | 7610106491690 | |
| Manufacturer number | 730516 |
Description
Description:
1-component polyurethane-based assembly foam, moisture-curing and with non-stick safety valve. Wherever insulation, filling, fixing and foaming are required, Coltogum universal foam is the product of choice.
Technical Data:
- VOC 0.49
- with safety valve
- optimised sound insulation
- yield up to 40 litres
Application Area:
For clean and controlled backfilling and foaming of connection joints, wall openings and cavities such as roller shutter or blind boxes as well as roof extensions and roof insulation. Door frames and window frames are easily filled and foamed, glued and sealed. In the case of interior doors, the joint between the door lining and the masonry must be fully filled with foam. Excellent properties for insulating cold/heat bridges and for sound insulation. The PU foam adheres to almost all building materials and can be left open with dense top coats (UV protection) of commercially available paint and varnish systems or additionally plastered or pasted over.
Application Notes:
Only apply to clean, grease-free and stable surfaces. 1C polyurethane foam requires additional moisture (water) for curing; dry and absorbent substrates must be well moistened beforehand.
Always observe the safety data sheet and technical data sheet!
Always observe the safety data sheet and technical data sheet!