{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Grooving insert Full radius, HU9310, Groove width w: 3mm
Article no.: 348664
Catalog no.: 275015
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | HOG-2740030AN | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Blade thickness | 3.8 mm | |
| Insert length | 10.7 mm | |
| Insert version | neutral | |
| Groove width | 3 mm | |
| Point angle | 10 degrees | |
| Tool material | Carbide | |
| Machining group | P (steel) | |
| Tool application group | ESE | |
| Cutting media, manufacturer’s designation | HU9310 | |
| Coating | uncoated | |
| Grade | HU730 | |
| Insert thickness | 3.8 mm | |
| Type of fastening for insert | C (without hole clamped from above) | |
| Interface coding for insert | HOG | |
| Interface coding for insert according to ISO TS 13399-60 | HOG-2740030AN | |
| Insert designation | HOG-2740030AN | |
| Type of product | grooving insert | |
| Number of teeth | 1 pcs. | |
| Direction of action | neutral | |
| Suitable for material | steel (P) | |
| Machining method | plunging (ESE) | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | form fit | |
| Chip breaker | yes | |
| Cutting conditions | continuous | |
| Number of potential uses | 1 pcs. | |
| Weight | 10 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 348664 | |
| Catalog number | 275015 | |
| EAN / GTIN | 4062406612627 | |
| Manufacturer number | 275015 3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
380
N
360
N
280
