{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
PowerFull Countersunk Full Thread Screws T50 Steel zinc plated blue 10x500
Article no.: 2006682
Catalog no.: 3983
Article code:
Product details
Technical Data
| Drive | Hexalobular socket | |
| Shank | Fully threaded | |
| Head height lk | 7 mm | |
| Material | Case hardened steel | |
| Thread length | 480 mm | |
| Surface | zinc plated blue | |
| Core Ø | 6.2 mm | |
| Head shape | Pan-Head | |
| Thread type | Wood thread |
Packaging units
| 1 Pack | 25 Pieces | |
| 1 Pallet | 1700 Pieces |
Identification & Classification
| Article number | 2006682 | |
| Catalog number | 3983 | |
| EAN / GTIN | 4048962445794 | |
| Manufacturer number | 562977 | |
| Article class | RJA |
Description
Description:
with drill point
Advantage:
- The tip geometry makes low axial and edge distances as well as high loads possible.
- The PowerFull II with a diameter of 10 mm has a distinctly different geometry to the diameters 6 and 8 mm. The 10 mm screw has a drill point which creates a pre-drilling effect and stops the long screws running off centre. There is less splintering risk is reduced and the screw-in torque is reduced.
- The cylindrical head can be countersunk deep into the wood using a long bit.
- The screw geometry significantly improves the pull-out load capacity and optimises the screw-in torque.
Application Area:
- Connection main beam / substructure
- Chevron-purlin connection
- Reinforcement of notches
- Openings
- Beam false edges
- Beam reinforcements
- Strengthening perpendicular to the grain
- Coupling purlins
- Support reinforcement / transverse pressure reinforcement
- Shear wood fixing (for roof insulation)
- Refurbishment of old beams
- Footing beams
- Element connections in wood frame construction
- Pressed steel-wood connections
- Solid hardwood of material strength classes C14 - C40 in accordance with EN 338 / EN 14081-1
- New: Solid beech, ash or oak in accordance with EN 338 / EN 14081-1, with pre-drilling
- Glued-laminated timber of at least material strength class GL24c in accordance with EN 1194 / EN 14080
- New: Glued-laminated timber made of beech, ash or oak according to European Technical Approval or the national regulations applicable at the installation site, with pre-drilling
- Laminated veneer lumber LVL in accordance with EN 14374
- Glued-solid timber Duo and Trio beams in accordance with EN 14080 or the national regulations applicable at the installation site
- Cross-laminated timber according to European Technical Approval or the national regulations applicable at the installation site
- Construction beech in line with approval Z-9.1-838 and Z-9.1-837 and FST according to ETA-14/0354, with pre-drilling
Application Notes:
- Screws with a cylinder head can be flush-mounted or sunk into the wood.