{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Codice articolo:
PowerFull Viti a filettatura completa svasata T50 in acciaio blu galvanizzato 10x500
Codice art.: 2006682
N. del catalogo: 3983
Codice materiale:
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Fare clic per ingrandire l‘immagine
Dettagli prodotto
Dati tecnici
| Attuatore | esalobata | |
| Tronco | senza gambo | |
| Altezza della testa lk | 7 mm | |
| Lunghezza filettatura | 480 mm | |
| Materiale | acciaio con trattamento termico | |
| Ø nucleo | 6.2 mm | |
| Finitura | zincato blu | |
| Forma testa | Testa cilindrica | |
| Tipo di filettatura | filetto di legno |
Identificazione e classificazione
| Codice articolo | 2006682 | |
| Numero del catalogo | 3983 | |
| EAN / GTIN | 4048962445794 | |
| Codice del produttore | 562977 | |
| Classe dell`articolo | RJA |
Descrizione
Descrizione:
con punta di trapano
Vantaggi:
- The tip geometry makes low axial and edge distances as well as high loads possible.
- The PowerFull II with a diameter of 10 mm has a distinctly different geometry to the diameters 6 and 8 mm. The 10 mm screw has a drill point which creates a pre-drilling effect and stops the long screws running off centre. There is less splintering risk is reduced and the screw-in torque is reduced.
- The cylindrical head can be countersunk deep into the wood using a long bit.
- The screw geometry significantly improves the pull-out load capacity and optimises the screw-in torque.
Area di applicazione:
- Connection main beam / substructure
- Chevron-purlin connection
- Reinforcement of notches
- Openings
- Beam false edges
- Beam reinforcements
- Strengthening perpendicular to the grain
- Coupling purlins
- Support reinforcement / transverse pressure reinforcement
- Shear wood fixing (for roof insulation)
- Refurbishment of old beams
- Footing beams
- Element connections in wood frame construction
- Pressed steel-wood connections
- Solid hardwood of material strength classes C14 - C40 in accordance with EN 338 / EN 14081-1
- New: Solid beech, ash or oak in accordance with EN 338 / EN 14081-1, with pre-drilling
- Glued-laminated timber of at least material strength class GL24c in accordance with EN 1194 / EN 14080
- New: Glued-laminated timber made of beech, ash or oak according to European Technical Approval or the national regulations applicable at the installation site, with pre-drilling
- Laminated veneer lumber LVL in accordance with EN 14374
- Glued-solid timber Duo and Trio beams in accordance with EN 14080 or the national regulations applicable at the installation site
- Cross-laminated timber according to European Technical Approval or the national regulations applicable at the installation site
- Construction beech in line with approval Z-9.1-838 and Z-9.1-837 and FST according to ETA-14/0354, with pre-drilling
Note applicative:
- Screws with a cylinder head can be flush-mounted or sunk into the wood.