{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Tap Alu machine tap for wire thread inserts, DLC, EG-M: EG-M3
Article no.: 2017934
Catalog no.: 133555
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Series | Master Tap | |
| Manufacturer’s designation | GARANT Master Tap Alu Maschinen-Gewindebohrer für Drahtgewinde | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Arbor size | 0045 | |
| Shank diameter DS | 4.5 mm | |
| Length of shank LS | 37 mm | |
| Thread type | EG-M | |
| Nominal diameter of metric thread D | 3 mm | |
| Thread D | EG-M3x0,5 | |
| Thread pitch | 0.5 mm | |
| Thread tolerance class | 6HX mod. | |
| Chisel edge diameter | 3.05 mm | |
| Length of tapping part Lc | 13.2 mm | |
| Tap infeed length | 2 mm | |
| Taper lead angle | 8.52 degrees | |
| Number of teeth | 3 | |
| Twist direction | neutral, straight | |
| Twist angle | 0 degrees | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Taper lead form | B | |
| Application for type of drilling | through hole | |
| To depth (x diameter) | 4 | |
| Number of clamping slots | 3 | |
| Core hole diameter | 3.15 mm | |
| Flank angle | 60 degrees | |
| Square-drive width across flats □ | 3.4 mm | |
| Tool material | HSS-E-PM | |
| Machining group | N (non-ferrous metals) | |
| Coating | DLC | |
| Interface | joint 1 | |
| Gauge length A | 64.525 mm | |
| Usable length L1 | 12 mm | |
| Overall length L | 63 mm | |
| Weight | 8 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | Werksnorm | |
| Data carriers | without data carrier | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | yellow | |
| Type of product | taps |
Identification & Classification
| Article number | 2017934 | |
| Catalog number | 133555 | |
| EAN / GTIN | 4067263830245 | |
| Manufacturer number | 133555 EG-M3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
35
N
32
N
20
N
20
N
18
N
18
N
18
N
25
Description
Version:
High-performance tap, specially developed for aluminium and non-ferrous alloys. Extra-long flutes and neck length for usable thread depths up to 4×D.
- HSS-E-PM tool material for high cutting edge stability.
- Ultra-smooth DLC coating for wear resistance and avoidance of edge build-up.
- Extra-long flute geometry.
Application:
For production of EG mounting thread according to metric ISO thread DIN 8140 for STI wire thread inserts (Screw Thread Insert).
Note:
Please be sure to observe the correct tapping hole ⌀ (see table)!