{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
SUMOCHAM drilling head ICM k7, IC908, ⌀ DC: 29mm
Article no.: 2026367
Catalog no.: 231750
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
154° Spitzenwinkel / 140° Schneidenwinkel
Product details
Technical Data
| Kühlschmierstoff | ja | |
| Serie | SUMOCHAM | |
| Herstellerbezeichnung | ICM 290 IC908 | |
| Schneidendurchmesser min. D | 29 mm | |
| Konfigurierbar | nein | |
| Anzahl Schneiden | 2 | |
| Spitzenwinkel | 140 Grad | |
| Schneidplattendicke | 16,8 mm | |
| für Grundelement Größe | 29 mm | |
| Schneidstoff | HM | |
| Zerspanungsgruppe | M (nichtrostender Stahl); N (NE-Metalle); S (schwer zerspanbare Werkstoffe) | |
| Schneidstoffe, Herstellerbezeichnung | ICM | |
| Beschichtung | TiAlN | |
| Sorte | IC908 | |
| Funktionslänge | 12,34 mm | |
| Schneidrichtung | rechtsschneidend | |
| Werkzeugausführung | Voll-Hartmetall | |
| Bearbeitungsverfahren | Bohren ins Volle | |
| Produktart | Schneideinsatz zum Bohren | |
| Inhalt | Einzelteil |
Identification & Classification
| Article number | 2026367 | |
| Catalog number | 231750 | |
| EAN / GTIN | 7291075244120 | |
| Manufacturer number | 5506730 |
Application Table
N
155
N
120
P
100
P
90
P
100
P
70
P
55
H
70
H
60
M
50
M
50
S
35
S
35
K
120
N
155
Description
Version:
Vee ground drilling head for precise positioning and stable seating. Angled, radial stop surfaces for a significant increase in clamping force due to the cutting forces acting during machining. For productive drilling with high feed rates.
ICM
Main area of application ISO M, ISO S (especially Inconel and titanium) as well as ISO N. Cutting edge with negative chamfer and special rounding – especially for stainless steel machining.
ICM
Main area of application ISO M, ISO S (especially Inconel and titanium) as well as ISO N. Cutting edge with negative chamfer and special rounding – especially for stainless steel machining.
Note:
Cutting data applies for the base body 5×D. Drill pilot holes exclusively with drilling head of the same type – in particular for drilling heads FCP and QCP-2M. Please observe the application instructions for the base body. Cutting tolerance of the inserts: k7 (positive toleranced cutting edge diameter).
Designation convention: [type] [⌀ DC]-[addition] [cutting material]
Examples:
No. 231740 6.5 ICP 065 IC908
No. 231742 18.5 ICP 185-2M IC908
No. 231745 18.5 HCP 185-IQ IC908
Designation convention: [type] [⌀ DC]-[addition] [cutting material]
Examples:
No. 231740 6.5 ICP 065 IC908
No. 231742 18.5 ICP 185-2M IC908
No. 231745 18.5 HCP 185-IQ IC908