{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
SUMOCHAM drilling head ICM k7, IC908, ⌀ DC: 29,5mm
Article no.: 2026495
Catalog no.: 231750
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
154° Spitzenwinkel / 140° Schneidenwinkel
Product details
Technical Data
| Wet maximum | suitable | |
| Oil | suitable only under restricted conditions | |
| Cooling lubricant | yes | |
| Series | SUMOCHAM | |
| Manufacturer’s designation | ICM 295 IC908 | |
| Cutter diameter min. D | 29.5 mm | |
| Distance from cutter corner to cutter tip | 4.55 mm | |
| Number of teeth | 2 | |
| Point angle | 154 degrees | |
| Insert thickness | 16.8 mm | |
| For base body size | 29 mm | |
| Tool material | Carbide | |
| Machining group | M (stainless steel); N (non-ferrous metals); S (difficult-to-machine materials) | |
| Cutting media, manufacturer’s designation | IC908 | |
| Coating | TiAlN | |
| Grade | IC908 | |
| Insert thickness T | 16.8 mm | |
| Functional length | 12.25 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Machining method | drilling into solid material (BVB) | |
| Type of product | cutter insert for boring | |
| Content | single part |
Identification & Classification
| Article number | 2026495 | |
| Catalog number | 231750 | |
| EAN / GTIN | 7291075244137 | |
| Manufacturer number | 5506731 | |
| Article class | 23J |
Application Table
N
155
N
120
P
100
P
90
P
100
P
70
P
55
H
70
H
60
M
50
M
50
S
35
S
35
K
120
N
155
Description
Version:
Vee ground drilling head for precise positioning and stable seating. Angled, radial stop surfaces for a significant increase in clamping force due to the cutting forces acting during machining. For productive drilling with high feed rates.
ICM
Main area of application ISO M, ISO S (especially Inconel and titanium) as well as ISO N. Cutting edge with negative chamfer and special rounding – especially for stainless steel machining.
ICM
Main area of application ISO M, ISO S (especially Inconel and titanium) as well as ISO N. Cutting edge with negative chamfer and special rounding – especially for stainless steel machining.
Note:
Cutting data applies for the base body 5×D. Drill pilot holes exclusively with drilling head of the same type – in particular for drilling heads FCP and QCP-2M. Please observe the application instructions for the base body. Cutting tolerance of the inserts: k7 (positive toleranced cutting edge diameter).
Designation convention: [type] [⌀ DC]-[addition] [cutting material]
Examples:
No. 231740 6.5 ICP 065 IC908
No. 231742 18.5 ICP 185-2M IC908
No. 231745 18.5 HCP 185-IQ IC908
Designation convention: [type] [⌀ DC]-[addition] [cutting material]
Examples:
No. 231740 6.5 ICP 065 IC908
No. 231742 18.5 ICP 185-2M IC908
No. 231745 18.5 HCP 185-IQ IC908