{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning WNMG 080408, for finish machining
Article no.: 2026907
Catalog no.: 251991
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | ISOTURN | |
| Wet maximum | suitable | |
| Manufacturer’s designation | WNMG 080408-F3M IC6025 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | triangular, with enlarged corner angles | |
| Thickness of the insert S | 4.76 mm | |
| Length of cutting insert L | 8.7 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 8.7 mm | |
| Diameter of the cutting insert d | 12.7 mm | |
| Corner radius R | 0.8 mm | |
| ISO-Code | WNMG 080408 | |
| Tool material | Carbide | |
| Machining group | M (stainless steel) | |
| Coating | CVD | |
| Insert thickness T | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | WNMG 080408 | |
| Interface coding for insert according to ISO TS 13399-60 | WNMG 080408 | |
| Insert designation | WNMG 080408 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Number of teeth | 6 pcs. | |
| Direction of action | neutral | |
| Suitable for material | stainless steel (M) | |
| Tolerance Class | M | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutting conditions | interrupted | |
| Number of potential uses | 6 pcs. | |
| Content | 10 pcs. |
Identification & Classification
| Article number | 2026907 | |
| Catalog number | 251991 | |
| EAN / GTIN | 7291075336757 | |
| Manufacturer number | 5567836 |
Application Table
M
M
Description
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.