{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
High performance anchor FH II 28/30 B with threaded bolt
Article no.: 2036698
Catalog no.: 4972
Article code:
Product details
Technical Data
| d0 | 28 mm | |
| SW | 30 mm | |
| Anzahl der Muttern | 1 | |
| Seismic-Zulassung | C1 / C2 | |
| Material | Galvanisch verzinkter Stahl | |
| min. Verankerungstiefe | 125 mm | |
| h2 | 185 mm | |
| Geeignet für Betonhohldiele | Nein | |
| Befestigung mit Spreizwerkzeug | Nein | |
| Antrieb | Sechskant | |
| Geeignet für gerissenen Beton | Ja | |
| M | M20 | |
| Nutzlänge | 30 mm | |
| Geeignet für ungerissenen Beton | Ja | |
| Profi / DIY | Profi | |
| Mit Kragen | Nein | |
| Werkstoff Anker | Stahl | |
| Anzahl der Scheiben | 1 | |
| Verpackung | Faltschachtel | |
| max. Dicke des Anbauteils | 30 mm | |
| l | 199 mm | |
| Oberflächenschutz Anker | galvanisch/elektrolytisch verzinkt | |
| Prüfzeichen / Zulassungen | Brandschutz-Klassifizierung |
Packaging units
| 1 Pack | 4 Pieces |
Identification & Classification
| Article number | 2036698 | |
| Catalog number | 4972 | |
| EAN / GTIN | 4006209475478 | |
| Manufacturer number | 47547 | |
| Article class | RMC |
Description
Advantage:
- The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2).
- The practical fixing using washers and nuts allows for the ultimate removal of the attachment if required later.
- The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required.
- The optimised geometry intelligently reduces the energy required for assembly.
- The approval regulates the use of hollow drills.
Application Area:
- Guard rails
- Staircases
- Consoles
- Steel constructions
- Cable trays
- Machines
- Gates
- Façades
Approved for:
- Concrete C20/25 to C50/60, cracked and non-cracked
Application Notes:
- The FH II is suitable for push-through installation.
- When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall.
- The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base.
- Available head shapes for flexible design solutions: Hexagon head (type S) and bolt version with nut and washer (type B).