{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
High-capacity anchor steel znb FH II 18/100 B
Article no.: 419230
Catalog no.: 4972
Article code:
Product details
Technical Data
| d0 | 18 mm | |
| SW | 19 mm | |
| Number of nuts | 1 | |
| Seismic approval | C1 / C2 | |
| Material | Galvanised steel | |
| min. anchorage depth | 80 mm | |
| h2 | 205 mm | |
| Suitable for hollow-core concrete slab | No | |
| Fixing with expansion tool | Nein | |
| Drive | Hexagonal | |
| Suitable for cracked concrete | Yes | |
| M | M12 | |
| Disc | 30 x 3 mm | |
| Usable length | 100 mm | |
| Suitable for non-cracked concrete | Yes | |
| Professional / DIY | Profi | |
| With collar | No | |
| Anchor material | Steel | |
| Number of washers | 1 | |
| Packing | Folding box | |
| Max. thickness of the attachment | 100 mm | |
| l | 215 mm | |
| Surface protection anchor | Galvanic/electrolytic zinc plated | |
| Test marks / approvals | Fire classification |
Packaging units
| 1 Pack | 10 Pieces | |
| 1 Pallet | 1760 Pieces |
Identification & Classification
| Article number | 419230 | |
| Catalog number | 4972 | |
| EAN / GTIN | 4006209468418 | |
| Manufacturer number | 46841 | |
| Article class | RMC |
Description
Advantage:
- The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2).
- The practical fixing using washers and nuts allows for the ultimate removal of the attachment if required later.
- The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required.
- The optimised geometry intelligently reduces the energy required for assembly.
- The approval regulates the use of hollow drills.
Application Area:
- Guard rails
- Staircases
- Consoles
- Steel constructions
- Cable trays
- Machines
- Gates
- Façades
Approved for:
- Concrete C20/25 to C50/60, cracked and non-cracked
Application Notes:
- The FH II is suitable for push-through installation.
- When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall.
- The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base.
- Available head shapes for flexible design solutions: Hexagon head (type S) and bolt version with nut and washer (type B).