{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Aluminium shoulder mill with thread, for indexable inserts ZD..
Article no.: 2042146
Catalog no.: 211757
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | screw holder | |
| Nominal size of mounting thread | M16 | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 17 mm | |
| Shank length LS | 40 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Insert designation | ZDHT 1505 | |
| Interface | joint 1 | |
| Overall length L | 40 mm | |
| Cutting direction | right-hand cutting | |
| Machining method | circular milling (round milling) (FZI); countersinking (plunge milling) (FSE); shoulder milling (FEC) | |
| Cutter diameter min. D1 | 42 mm | |
| Head diameter D2 | 29 mm | |
| Max. cutting edge length | 15 mm | |
| Setting angle | 90 degrees | |
| Relief angle | 10 degrees | |
| Plunge angle max. αmax | 2.9 degrees | |
| Plunge depth max. ae max | 29.56 mm | |
| Number of effective cutters (peripheral side) | 4 | |
| Tool exchange | PowerCard | |
| Diameter of circular interpolation milling min. | 74 mm | |
| Diameter of circular interpolation milling max. | 82 mm | |
| Circular interpolation milling ap | 9 mm | |
| Content | single part | |
| Type of product | end / face mill | |
| Mounting thread M | M16 | |
| Recommended tightening torque | 3 Nm |
Identification & Classification
| Article number | 2042146 | |
| Catalog number | 211757 | |
| EAN / GTIN | 4067263107071 | |
| Manufacturer number | 211757 42/4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
High-performance milling system for high cutting speeds. Absolutely precise insert bedding. Exceptional torsional stiffness thanks to optimised protection against centrifugal force.
Attention:
Before using the indexable insert No. 211776 ALU (r = 5.0 mm) and 211777 ALU (r = 6.0 mm), the insert seats of the carrier must be modified.