{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
High-strength threadlocker B270 green 50ml
Article no.: 2093205
Catalog no.: 3480
Article code:
Product details
Technical Data
| Inhalt | 50 ml | |
| Farbe Klebstoff | Grün | |
| Strength class | hochfest | |
| Chemical basis | Modifiziertes Acrylat | |
| USP2 | Kein Gefahrgut | |
| Touch dry after | 5 min - 15 min | |
| for thread size M to | M20 | |
| Temperaturbereich | -55 °C - 180 °C | |
| minimum break-away torque | 35 Nm - 35 Nm | |
| Flashpoint | 65 °C | |
| Dynamic viscosity | 300 mPas - 900 mPas | |
| USP1 | VOC-frei |
Identification & Classification
| Article number | 2093205 | |
| Catalog number | 3480 | |
| EAN / GTIN | 4260646035262 | |
| Manufacturer number | 75000-ZF.05 |
Description
Description:
The product cures in the absence of atmospheric oxygen and in contact with metal. B270 Eco high-strength seals and closes many types of screw connections.
Advantage:
- Also secures slightly dirty/oily screws
- Temperature resistant from -55 °C to 180 °C
- Suitable for all metals
- Prevents loosening due to vibration
- Hazard-free
Application Notes:
High-strength screw locks are not suitable for:
metal-plastic flange connections, areas where
gaseous oxygen is used, or sealing
against media containing highly oxidising acids.
The product should only be used on standard metal threads.
The affected surface must be free of grease and completely clean .
Then use the threadlocker to completely fill the gap between
the two parts, assemble the parts and
seal them completely. Inadequate sealing can
lead to leaks after a certain period of time. Do not move after
the curing process has begun.
Before commissioning, allow the adhesive to cure completely for 24 hours.
For series production, lock or secure the adhesive joint with a
pipe wrench to prevent the layer that is already
in the curing process from breaking open. Before
using the product, please consult the safety data sheet.
metal-plastic flange connections, areas where
gaseous oxygen is used, or sealing
against media containing highly oxidising acids.
The product should only be used on standard metal threads.
The affected surface must be free of grease and completely clean .
Then use the threadlocker to completely fill the gap between
the two parts, assemble the parts and
seal them completely. Inadequate sealing can
lead to leaks after a certain period of time. Do not move after
the curing process has begun.
Before commissioning, allow the adhesive to cure completely for 24 hours.
For series production, lock or secure the adhesive joint with a
pipe wrench to prevent the layer that is already
in the curing process from breaking open. Before
using the product, please consult the safety data sheet.