{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Medium-strength threadlocker B243Eco blue 10ml bottle
Article no.: 2093207
Catalog no.: 3480
Article code:
Product details
Technical Data
| Inhalt | 10 ml | |
| Farbe Klebstoff | Blau | |
| Festigkeitsklasse | mittelfest | |
| Chemische Basis | Modifiziertes Acrylat | |
| USP2 | Kein Gefahrgut | |
| Handfestigkeit nach | 5 min - 15 min | |
| für Gewindegröße M bis | M36 | |
| Temperaturbereich | -55 °C - 180 °C | |
| minimales Losbrechmoment | 15 Nm - 25 Nm | |
| Flammpunkt | 65 °C | |
| Dynamische Viskosität | 1’500 mPas - 4’000 mPas | |
| USP1 | VOC-frei |
Identification & Classification
| Article number | 2093207 | |
| Catalog number | 3480 | |
| EAN / GTIN | 4260646035231 | |
| Manufacturer number | 74000-TF.01 |
Description
Description:
The product cures in the absence of atmospheric oxygen and in contact with metal. B243 Eco medium-strength seals and closes many types of screw connections.
Advantage:
- Also secures slightly dirty/oily screws
- Temperature resistant from -55 °C to 180 °C
- Suitable for all metals
- Prevents loosening due to vibration
- Hazard-free
Application Notes:
Medium-strength screw locks are not suitable for:
metal-plastic flange connections, areas where
gaseous oxygen is used, or sealing
against media containing highly oxidizing acids.
The product should only be used on standard metal threads.
The surface in question must be free of grease and completely clean.
Then use the threadlocker to completely fill the gap between
the two parts, assemble the parts, and
seal them completely. Inadequate sealing can
lead to leaks after a certain period of time. Once
the curing process has begun, do not move the parts.
Before use, allow the adhesive to cure completely for 24 hours.
For series production, lock or secure the adhesive joint with a
pipe wrench to prevent the layer that is already
in the curing process from breaking open. Before
using the product, please consult the safety data sheet.
metal-plastic flange connections, areas where
gaseous oxygen is used, or sealing
against media containing highly oxidizing acids.
The product should only be used on standard metal threads.
The surface in question must be free of grease and completely clean.
Then use the threadlocker to completely fill the gap between
the two parts, assemble the parts, and
seal them completely. Inadequate sealing can
lead to leaks after a certain period of time. Once
the curing process has begun, do not move the parts.
Before use, allow the adhesive to cure completely for 24 hours.
For series production, lock or secure the adhesive joint with a
pipe wrench to prevent the layer that is already
in the curing process from breaking open. Before
using the product, please consult the safety data sheet.