{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Value pack GARANT Master Steel SlotMachine solid carbide roughing end mill HPC, 5 pieces
Article no.: 2109837
Catalog no.: GG1048
Article code:
Product details
Technical Data
| Cooling lubricant | no | |
| Wet minimum | suitable | |
| Series | Master Steel | |
| Wet maximum | suitable | |
| Manufacturer’s designation | GARANT Master Steel SlotMachine VHM-Schruppfräser HPC | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Tool material | solid carbide | |
| Machining group | M (stainless steel); P (steel) | |
| Coating | TiAlN | |
| Cutter diameter | 4 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance Class | d11 | |
| Cutting edge length | 8 mm | |
| ISO milling cutter type | End / face mill | |
| Relief angle | 42 degrees | |
| Number of effective cutters (peripheral side) | 5 | |
| Twist direction | right-hand | |
| Twist angle | 42 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 5 | |
| Overall length | 54 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 6527 | |
| Machining method | End milling; slot milling; spiral milling (thread milling) | |
| Colour ring | green | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Correction factor | 1.5 | |
| Cutting depth min. | 0.25 mm | |
| Max. cutting depth | 4 mm; 8 mm |
Identification & Classification
| Article number | 2109837 | |
| Catalog number | GG1048 | |
| EAN / GTIN | 4067263134770 | |
| Manufacturer number | GG1048 4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
200
P
180
P
160
P
140
P
110
M
50
M
35
K
200
Description
Version:
With a new-type knurled profile, optimised for higher feed rates. Improved cutting edge protection thanks to slight edge honing. Tremendous bending strength due to the use of ultra-fine grain substrate.
Feed rate per tooth up to 0.1 mm up to a depth of 2×D (in the slot milled from solid).
Same as 205548.
Feed rate per tooth up to 0.1 mm up to a depth of 2×D (in the slot milled from solid).
Same as 205548.
Advantage:
The tool geometry produces particularly tightly rolled swarf that is discharged via flat chip breaker recesses. As a result, the tool maintains an extremely stable core. Plunge angle of up to 10° possible thanks to generous recess on the front face.
Application:
For roughing machining, particularly suitable for full-slot machining.